This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor inter...
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for gener...
This clear inner glass lets you see inside your LG oven while keeping the heat in. If your oven glass is cracked or chipped, replacing it helps restore energy efficiency and safe cooking. It’s made to...
Upgrade your oven with this durable gliding shelf rack, designed to provide a stable surface for baking, roasting, and broiling. Its smooth sliding design makes it easy to insert and remove dishes, of...
Facing issues with your LG Electric Range Convection Oven? It might be due to a faulty fan motor. Luckily, we've got the solution in the shape of this authentic LG AC Fan Motor. This little gem ensure...
This oven base plate and bottom heat shield is designed to protect the lower section of the oven from excessive heat while providing structural support for internal components. Positioned at the base ...
$320.91
Special Order
Questions And Answers for FG4331ES
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
March 25, 2023
How do you know if when the code F 11 is flashing if it is the igniter or the sensor the oven would not get past 100 to 110° so would that be the igniter?
For model number FG4331ES
Hello Chris, thank you for contacting us. Based on the research, the F11 error code indicates a failed oven sensor. We would recommend checking the temperature sensor, part number PS11732697. If the issue still occurs, you may need to check the control board, part number PS3533908. We hope this solves your problem!
Have an LG gas range/oven, FG4331ES, and need to convert back to natural gas.
Is there a kit or do you know the orifice sizes for range and oven?
For model number FG4331ES
Hello Nikos, thank you for reaching out. To convert back to natural gas, you may need to replace the LP orifices with natural gas orifices. The part numbers for the burner orifices are: PS3535676, PS3535677, PS3535680, PS3535678, and PS3535679. The oven burner orifice is part number PS3535672. We hope this information helps!
Was this helpful?
Thank you for voting!
Jaime
October 25, 2024
Where can I buy the knobs for model FG4331
For model number FG4331ES
Hi Jaime,
Thank you for your question. The part number for the knob kit is PS7788757. We hope this helps!
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now we have a new stove
i removed the oven door by lifting the safety latches on each hinge and gently lifted the door off. once off i could access the 2 large phillips head screws and loosened and removed them. then i simply slid out the old and slid in the new & reversed the process.
