Has your refrigerator light gone dim or burnt out? Get your fridge lighting back up to par with this genuine Frigidaire LED Light Bulb. Designed just for Frigidaire, Electrolux, White Westinghouse, an...
Looking to improve the space efficiency of your fridge? Our genuine Frigidaire door bin is your go-to solution. Specifically tailored for Frigidaire refrigerators, it's designed to give you that seaml...
This refrigerator evaporator fan blade is designed to attach to the evaporator fan motor and circulate cold air evenly throughout the refrigerator and freezer compartments. Made from durable black pla...
Have you been struggling with limited storage in your refrigerator? The Frigidaire full-width deli drawer is here to provide a solution. It's a genuine OEM (Original Equipment Manufacturer) part, prov...
Got a faulty crisper drawer in your fridge? Let's get your refrigerator back to its prime with our authentic PAN ASSEMBLY Crisper drawer that comes with rollers. Produced by trusted appliances manufac...
Get your refrigerator cooling again with this genuine compressor start device. It helps your compressor start smoothly so your appliance can keep food fresh. If your fridge isn’t staying cold or the c...
The repair itself total time was quick and easy. Since the original fan blade blew apart, it was only a matter of putting the new one on in it's place. This can be done by feeding the blade between the cowling and Condenser coil and applying pressure to get it on the shaft.
If your fan is still on the shaft, simply push it off and extract it the same way. Then place the new one on the shaft.
In my case, since the part would take a couple days to get, and I had food both in the fridge and the freezer, I removed and unplugged the Condenser Fan Motor and the cowling frame and temporarily spliced a small fan I had into the line for the condenser motor. This kept the fridge working long enough to get the replacement part.
Side note. Direction of airflow is towards the Compressor, and draws air across the Condenser coils.
The part i recieved, from parts select was a larger in circumfrence (<1/4) than the original. However i was not aware of this until after i treid to repair it.
I removed the broken fan from the condenser. This was very sipmle.
When i pluged the refridgerator back in to the outlet the fan tried to start up but soon began to make aloud noise, due to there not being enough clerance.
