This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides ...
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
This bin can be moved according to space needed. It holds items on the door of your refrigerator.
NOTE: This bin is only available in clear plastic now.
The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things froze...
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
Keep your produce fresh and your fridge organized with this crisper pan cover frame. It fits above the bottom drawer and helps control humidity levels for fruits and vegetables. The frame is sturdy an...
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
No Longer Available
Questions And Answers for FFSS2615TE0
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerrel
October 25, 2022
after i reset the ice maker how long should it take before i see any ice?
For model number FFSS2615TE0
Hello Jerrel, thank you for reaching out. Normally, ice is produced at a rate of 8 cubes every 75 to 90 minutes and it takes 24 to 36 hours for the ice maker to make ice. A side-mounted ice maker produces 4 to 4.5 pounds of ice every 24 hours. We hope this information is useful.
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
November 30, 2021
Which part do I need to fix. H1 code is on the freezer side freezer not working
For model number FFSS2615TE0
Hello David, Thank you for the question. The error code H1 indicates that a freezer sensor shorted in freezer display. We suggest checking the wiring between a thermistor and board. If the wiring is good, the Thermistor may need to be replaced. We hope this helps!
Freezer does not keep food frozen. (H) appears periodically on Freezer display and resets to (1). How can I correct this. Items such as pizzas, biscuits, popsicles will not freeze solid. Ice maker not making ice.
For model number FFSS2615TE0
Hi Rebecca, thank you for reaching out. The "H" or "HI" code signifies that the freezer's temperature is too high. Make sure the freezer door is completely closed and the seal is intact. If it is fine, the issue could be with the thermistor assembly, part number PS8760187. You may need to replace it to fix the issue. We hope this solves your problem!
The copper tubing in the back of the fridg. That goes to the ice maker broke. Is there a part I can replace it with that is not copper. If not please give me the part number i need.
For model number FFSS2615TE0
Hello Ilene, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS429430. Hope this helps!
I replaced the Thermistor Assembly, my freezer is very cold now, but it still won't make ice (ice maker works when I pour water in it to test it). Ice builds up on back panel in freezer, Water dispenser works but no ice from ice maker. What part or parts do I need to correct this?
For model number FFSS2615TE0
Hello Rebecca, thank you for getting in touch. According to our research, you will need to replace the ice maker assembly, part number PS12364147, to fix the issue. Also, check the water filter, if it is not changed for a long time, replace it. We hope this helps.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
