Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
15 days ago
The temperature fluctuates from about 37 to 45 degrees without touching the control. The control is set high.
For model number FFPA3322UM
Hello Jim, thank you for the question. Temperature fluctuations between 37°F and 45°F, even when set to the highest (coldest) setting, indicate that the is likely struggling with its cooling cycle. If the fridge is overloaded or if items are blocking the air vents, cold air cannot circulate properly, leading to warmer spots. Ensure there is space around items for air to move. If the unit is located in a very warm, humid environment (e.g., a hot garage in summer), it may struggle to maintain a consistent temperature. A poor seal lets warm, humid air in, causing the compressor to work harder and creating wide temperature swings. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
Gil
October 22, 2021
I need the front leg mount for the left side
For model number FFPA3322UM
Hi Gil,
Thank you for your question. The part number listed under your model number for the leveling leg is PS12705443. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
removed water tray, used a razor blade to brake the seal from the face plate and the fridge, The hardest part was the three screws holding the dispenser face place on where rusted over. I wound up drilling them out. Once the screws removed, a slight lift, the face plate comes right off. I unplugged the cable, and set it aside. Now remove the next three screws, and the dispenser falls forward, (as far as the water line allows) undo the screws leaving the one emplace to hold the ice lever. push up twist. The hard part is getting the new one up and in. just takes a little patients.
