This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws.
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out.
This dryer lint screen is for laundry centers.
Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer.
Follow the instructions in the owner's manual when installing this part.
The pump is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.
The upper felt seal for your dryer is attached to the top edge of the drum support area, and is held there by a high temperature adhesive. It creates a seal where the dryer door opens and closes, so t...
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops ...
$119.16
In Stock
Questions And Answers for FFLE2022MW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Javier
December 28, 2022
Hello when i go to start my washer it beeps 3 times and nothing happens. What should i look for thanks
For model number FFLE2022MW2
Hello Javier, thank you for your inquiry. According to our research, we would recommend checking the Motor Control Board, part number PS12728788, for any damages. If it is good, then the issue is probably with the Main Control Board, part number PS11703854. Let us know if you have further questions!
We had to hold down the washer lid to get it to start. This has gone on for a couple of months. Now it won't start at all.
For model number FFLE2022MW2
Hello Jerry, thank you for contacting us. We recommend you replace your lid latch switch, part number PS5574024, as a faulty lid lock switch can cause the washer to not start. We hope this solves your problem!
Frigidaire laundry center dryer making thumping sound only. It does not squeal, clothing not getting caught, and heats up and turns just fine. Any idea what's causing it?
For model number FFLE2022MW2
Hello and thank you for writing.
This could be caused by a loose or faulty idler arm PS11775626. You should check to make sure this part has not been damaged or come loose, you also need to check the belt at the same time to make sure it is still in place. We hope this helps. Please contact us anytime if you require further assistance.
I need a new lint trap. Can you ship it, or tell me where to buy the replacement either in zip code 92260 0r 90049?
For model number FFLE2022MW2
Hello and thank you for writing.
The lint screen PS12585473 is in the list of compatible parts for your model. We hope this helps. Please contact us anytime if you require further assistance. If you would like to place an order with our company or inquire about pricing, availability, and shipping, you will have to contact our customer service. You can do so one of two ways: online: www.partselect.com or telephone: 888-738-4871. Thank you.
Dryer stopped working. Have not used the dryer very much. Was working just fine plug directly into a 220 amp plug. No breakers tripped. Washing machine works fine.
For model number FFLE2022MW2
Hello Christian, thank you for your question. We have researched your model and found that the issue is probably with the Thermal Limiter, part number PS419402. If that does not take care of the issue, then the problem is most likely to be related to the High Limit Thermostat, part number PS446428. If you require assistance to place an order, please contact customer service. We hope that helps!
1. Unplug dryer from outlet 2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs 3. Lift up top and tilt back out of your way 4. Unscrew two phillips scews on inside of front panel 5. Lift up and out the front panel. Two spring clips at bottom. 6. Rlease tension on drum belt at the motor. Access panel at rear of dryer. 7.Unscrew 3 screws from inside, center rear of drum. 8. Remove drum through the front of the dryer. You may have to spread the sides apart a little bit for it to fit 9. Lift up on the rear drum bearing to remove it from the bearing retainer. ( U shaped plastic socket) 10. unsrew 2 screws and remove the bearing retainer, ground ball. Ball retainer is on outside of dryer. 11. Vacuum everything--duct, blower, lint trap, ect. 12. Intall new bearing retainer and grounding ball, an assistant is helpful at this time, one to hold ball retainer on rear of dryer, one to screw it in from the inside 13. reassemble remainder of parts in reverse order.
Unplugged Dryer. Opened top of Dryer, over the drum. Removed Thermal Limiter. Tested the Thermal Limiter - found it was open. Checked all vents and exhaust tube for lint build-up. Replaced Thermal Limiter. Closed top of dryer. Plugged Dryer back. Tested Dryer - it works.
uplugged washer took front off washer 2 screws pryed up top pump was mounted with 2 screws and 2 wires took off found change in pump and the fins to pump worn off ordered part off line the wait for part was longer than the amount of time to fix problem and cost of part saved me about $25-35 if I was to buy local worth wait save money and fix problem washes like new spins and drains all water from tub.
