This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
This plastic cover and stem assembly helps hold the lower spray arm in place.
$39.53
In Stock
Questions And Answers for FFID2426TW2A
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
CHRISTINE
November 11, 2023
i only need the little plug that closes the rinse aid dispenser. it came loose and melted.
can you give me a price for that part only?
For model number FFID2426TW2A
Hi Christine, thank you for the question. The part you are looking for is not available separately but comes as a part of the detergent dispenser, part number PS11770487. So, to replace this part, you may need to replace the entire assembly. Let us know if you have further questions!
Hello Eric, thank you for asking. We would recommend checking the user interface control board, part number PS12585991, to fix the issue. We hope this helps!
I am looking for the lower arm for my dishwasher. The picture you show does not match up with the old one?
For model number FFID2426TW2A
Hello Linda, thank you for reaching out. According to our research, the compatible lower spray arm for your Frigidaire dishwasher is part number PS11770509. It is a genuine OEM part sourced from the manufacturer and it might differ in appearance but is among the compatible parts. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away the 2 wires that were attached to each side of the heater element. I removed the two nuts and replaced them with the parts I ordered from partselect.com. I then put the appropriate wires back at the end of the heater element and ran the dishwasher to check for leaks. No leaks... it was fixed.