This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white i...
$107.48
In Stock
Order within the next 10 hrs and your part ships today!
This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
$145.77
In Stock
Order within the next 10 hrs and your part ships today!
This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator do...
$20.46
In Stock
Order within the next 10 hrs and your part ships today!
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base...
$75.85
In Stock
Order within the next 10 hrs and your part ships today!
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
$27.52
In Stock
Order within the next 10 hrs and your part ships today!
Order within the next 10 hrs and your part ships today!
Questions And Answers for FFHB2740PE5A
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
December 24, 2019
The freezer and the fridge are not cooling, the compressor doesn’t seem to be working. All fan motors are running
For model number FFHB2740PE5A
Hello Bill and thank you for writing.
It certainly sounds like a faulty compressor PS2368055 you should check for signs of damage, and replace it if needed. We hope this helps. Please contact us anytime.
what is the part description or # of the User Interface or Display Screen?
For model number FFHB2740PE5A
Hi Marie,
Thank you for your question. The part number listed under your model number for the user interface is PS16555506. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Hello Aj, Thank you for the question. We have researched the model number provided, it is does not list a Air Filter. We hope this helps!
Was this helpful?
Thank you for voting!
Michael
May 20, 2022
Upper ice maker wont shut off water when full? Also bottom ice maker in freezer arm seems locked or frozen in place? 3. Can I remove lower ice maker, (add on) without shutting off water supply?
For model number FFHB2740PE5A
Hello Michael, Thank you for your inquiry. We have included a link to our video on how to test a water inlet valve and a refrigerator ice maker. Most ice makers are usually connected by a wiring harness that you can unplug, so you do not need to turn off the water supply, although it is recommended to unplug the refrigerator. We have also included a link here to our video on how to install an ice maker for a Frigidaire refrigerator to give you a general idea of the repair: https://www.youtube.com/watch?v=_izttWQ9RFg&list=PL3EB33F2356EAFCD4&index=51 We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Pete
June 17, 2021
Ice maker is not making ice.Trouble shooting guide?
For model number FFHB2740PE5A
Hello Pete, Thank you for the question. The first thing to check is the Water Filter. If the Filter has not been replaced in 6 months, it can clog up and not allow water to the Ice Maker. The next part to check is the Water Valve. Please see the link below on how to test the Water Valve. If the Valve is good, the Ice Maker may need to be replaced. We hope this helps!
https://www.partselect.com/Refrigerator+test-water-valve+repair.htm
First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There is 2 screws holding the solenoid in place and one ground wire. This was an easy fix and I know I saved a lot of money.
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
