FFGC3026SWD Frigidaire Cooktop - Overview
Sections of the FFGC3026SWD
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
LP Conversion Kit
PartSelect #: PS3633782
Manufacturer #: GRLP4
The LP conversion kit is used in ranges
$81.26
In Stock
Order within the next 8 hrs and your part ships today!
CAP
PartSelect #: PS11775704
Manufacturer #: 5304508441
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.
$48.14
In Stock
Order within the next 8 hrs and your part ships today!
CAP
PartSelect #: PS11775705
Manufacturer #: 5304508442
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills. The surface burner cap is located on the top of the burner head and is used in ranges ...
$43.07
In Stock
Order within the next 8 hrs and your part ships today!
Igniter/Orifice Mounting Screw
PartSelect #: PS440022
Manufacturer #: 316240600
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...
$24.05
In Stock
Order within the next 8 hrs and your part ships today!
CAP
PartSelect #: PS11775706
Manufacturer #: 5304508443
Sold individually.
$63.37
In Stock
Order within the next 8 hrs and your part ships today!
MODULE
PartSelect #: PS11766164
Manufacturer #: 5304505695
$74.96
In Stock
Order within the next 8 hrs and your part ships today!
CAP
PartSelect #: PS11775719
Manufacturer #: 5304508468
Are you dealing with an unevenly heating stove? Let us help you solve that problem with our high-quality, authentic Frigidaire Gas Burner Cap. This cap is crucial for your stove, as it provides a unif...
$58.30
In Stock
Order within the next 8 hrs and your part ships today!
Burner Valve - Blue Stem - 125 BTU
PartSelect #: PS11770440
Manufacturer #: 5304505691
Cook with confidence using this replacement burner valve. It controls the gas flow to your cooktop burner so you can adjust the flame for perfect heat. If a burner won’t light, the flame is uneven, or...
$77.48
In Stock
Order within the next 8 hrs and your part ships today!
Sealed Burner - 9.5K
PartSelect #: PS2364157
Manufacturer #: 316558300
This sealed burner delivers consistent heat output for precise cooking performance. Its design helps contain spills and simplifies cleanup while ensuring efficient flame control. Installation is strai...
$65.26
In Stock
Order within the next 8 hrs and your part ships today!
VALVE
PartSelect #: PS11770441
Manufacturer #: 5304505692
This valve regulates the flow of water into the appliance, opening and closing as needed to support proper operation. It is commonly replaced when water flow becomes inconsistent, stops entirely, or leaks occur.
$79.94
Special Order
Burner Base - 14k
PartSelect #: PS2361390
Manufacturer #: 316438600
$94.11
In Stock
Order within the next 8 hrs and your part ships today!
Sealed Burner - 5K
PartSelect #: PS2345235
Manufacturer #: 316438200
This sealed surface burner delivers controlled heat for precise cooking while preventing spills from entering internal components. Designed for efficiency and easy cleaning, it is replaced when igniti...
$70.27
In Stock
Order within the next 8 hrs and your part ships today!
Common Symptoms of the FFGC3026SWD
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Top burners were not lighting without a match
Was easy...I pulled oven out from the wall so I could get to the back.i used a nut driver to remove small silver cover.matched up wires to the never module and re installed.pluged oven back in and burners lit perfectly
Parts Used:
-
Earl from ALLIANCE, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner ingnighter would not lite burner
Replaced the ingintion module, still did not work, replaced the burner complete with new ingiter , it now works but another one quit . the front right one has 5 ohms resistance ,replaced with new one with 0 ohms, the back left has 2 ohms resistance and now it does not work , will need to replace that burner allso. too bad you can't buy just the spark module for the burner.
Parts Used:
-
Wayne from Palestine, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
30 of 86 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two of theTop gas burners would not spark
Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site.
Parts Used:
-
Robert R from Lewistown, PA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!