This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
This lower spray arm assembly is a vital component in your dishwasher, responsible for distributing water and detergent throughout the tub during the wash cycle. Its rotating motion ensures thorough c...
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
This filter is for dishwashers.
The filter removes food particles and debris from the water to prevent the drain from clogging.
Follow the instructions in the manual when installing this part.
This rail end cap, or dishrack stop clip, is a genuine OEM replacement part for your dishwasher. This part keeps the rack in your dishwasher from sliding out. This is a very easy repair, to complete i...
This heating element helps heat water and dry dishes in your dishwasher. It fits various models from Frigidaire, Kenmore, Crosley, and related brands. Located at the bottom of the tub, it replaces old...
$106.52
In Stock
Questions And Answers for FBD2400KW12B
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carolyn
January 14, 2022
My dishwasher started making a very loud humming sound when it’s supposed to switch from sensing and pre rinse to washing. I think that’s the pump
Motor. It drains well. I’m. It sure if it’s the inlet valve or something deeper. How would I narrow it down?
Do I have to get the entire motor assembly?
Any help would be appreciated.
For model number FBD2400KW12B
Hi Carolyn,
Thank you for your question. If your dishwasher is making a loud humming sound between cycles, it is likely the pump and motor assembly and it will need to be replaced. The part number listed under your model number for the pump motor is PS8747117. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Hello Roberta, thank you for your question. The Timer is part PS8747114. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
I can’t find the screw on cap where you pour the jet dry in so can I order that part?
For model number FBD2400KW12B
Hello Susan, thank you for the question. According to the manufacturer, the white cap, part number PS421128, will fit the detergent dispenser and it can be ordered. The grey cap is only available as part of the dispenser. We hope this helps.
My dishwasher won't release the detergent during the cycle. The door is stiff to open. Can this part be replaced?
For model number FBD2400KW12B
Hi Sandra, thank you for reaching out. Yes, the detergent dispenser for your model is part number PS11770487. You may need to replace it to fix the issue. We hope this solves your problem!
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
Over Thanksgiving, the spray arm in my dishwasher apparently popped off and was partially melted. I remounted it inside the dishwasher, but the new hole was on the side of the arm. I think this resulted in water being sprayed directly against the door and not up through the top holes. It flooded my kitchen floor.
The spray arm pops on and off with plastic tabs (?) at the base. You can lightly pry with a butter knife or simply wiggle it off. The new one popped right on. Easiest repair EVER.
