This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.
This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets f...
***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and th...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
NOTE: ...
Keep your refrigerator organized with this replacement meat drawer, designed to fit securely in the lower section of select models. It’s ideal for storing meats and other items that need to be kept se...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger
January 10, 2023
What is the cubic feet capacity for this Whirlpool refrigerator/freezer?
For model number ET1CHMXKQ03
Hello Roger, thank you for your question. The Cubic feet is 20.8. Thank you and good luck with this repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
October 21, 2023
Could you provide the exact dimensions for width, height and depth (including handles) for this model? Thank you!
For model number ET1CHMXKQ03
Hello Kathy, thank you for your question. The length of the Fresh Food Handle is 23" and the Freezer Handle is 21".Other measurements include Refrigerator Capacity: 14.4 Cu. Ft., Freezer Capacity: 6.5 Cu. Ft., Total Capacity: 20.9 Cu. Ft., Width: 32 1/2 Inch, Depth incl. Handles: 31 3/8 Inch and
Overall Height: 66 1/4". We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
December 28, 2023
My refrigerator is leaking water it doesn’t have an ice maker or any water connected
For model number ET1CHMXKQ03
Hello Richard, thank you for getting in touch. Based on our understanding of the issue, we would suggest inspecting the defrost drain hose. Food particles and other debris can clog the drain hose. Eventually, a blockage will cause melted condensation to leak on the floor. If this is not the issue, underneath your refrigerator is a drain pan that collects any condensate water from the evaporator fins. If there is a crack, dent, or split in the pan, collected water may leak. We would recommend replacing the drip pan, part number PS1560001, to fix the issue. Glad to be of assistance!
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
