The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack ...
This manufacturer-certified Refrigerator Door Shelf Bin, also known as the crisper bin and door shelf bin, is made of clear plastic, and is easy to install. It is used to hold items in the fridge door...
The Door Cam is a black plastic part which helps the door pivot shut while keeping the door and hinge in proper alignment. Lubricating this part upon installation may help it move easier. It attaches...
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air f...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Note: This valve has been updated by the manufacturer and no longer includes the removable pre-filter bracket connector. It must be ordered separately; part number WPW10445062.
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randall
March 21, 2022
Low water volume at in door dispenser. Water filter replaced about 1 month ago.Thank you.
For model number ED5LHAXWT02
Hi Randall,
Thank you for your question. If water is dispensing slowly, the water line in the door may be partially frozen or there may be an issue with the water pressure in your home. There are some parts you should check as well. You should also check the water inlet valve, the micro switch, the dispenser control switch and the water filter housing. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Ice maker form’s good cubes but does cycle through to drop cubes in the bin.
For model number ED5LHAXWT02
Hello Randall, thank you for your inquiry. If your ice maker is not dropping ice, maybe there is a blockage in the ice tray, or an ice cube is jammed between the bin and the lever. If this happens, here are some things you can do: Remove the ice bin to see if there is ice accumulation. Remove any blocked ice by carefully chipping at it with a plastic knife. If this does not help, you will need to replace the cycling thermostat, part number PS11743313. Thank you for your inquiry, good luck with this repair!
Hi guys. After replacing my water filter, I now have a tiny little stream of water at the water dispenser. If I push it in with a bit of force, it increases the flow to normal level. Have I gotten a poorly fitting filter, or might it be something else? I’ve not experienced this condition previously. Thank you!
For model number ED5LHAXWT02
Hello Randall, thank you for the inquiry. According to our research, you may need to check that you have installed the water filter correctly. If the issue still occurs, you may need to check the dispenser switch, part number PS11738948, to fix the issue. It controls dispensing of ice or water when you press the dispenser lever. We hope this helps!
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks