Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
$80.31
In Stock
Order within the next 12 hrs and your part ships today!
This 3400-watt bake element has screw style connections. The bake element is located on the bottom of the oven cavity and supplies the heat for baking. If your oven is not heating evenly, element will...
$267.46
In Stock
Order within the next 12 hrs and your part ships today!
This convection element generates heat to support even air circulation and consistent cooking performance. Its high-output design allows for efficient temperature recovery and uniform results. Replaci...
$134.40
In Stock
Order within the next 12 hrs and your part ships today!
Here's an authentic Vent Tube Adapter Assembly with a converter for your Frigidaire oven. This authentic part is designed especially for Frigidaire range/stove/oven vents, ensuring you're getting the ...
$89.38
In Stock
Order within the next 12 hrs and your part ships today!
Order within the next 12 hrs and your part ships today!
Questions And Answers for E30EW7CEPS4
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
TINA
March 9, 2024
My ser.is NF73809296.
It shows F10 ERR.
It is too hot.
Can you help me to fix it?
Could you please send me a vedio to teach me to fix it?
thank you so much
For model number E30EW7CEPS4
Hello Tina, thank you for getting in touch. This error means that the unit has detected runaway temperature. We would recommend checking the temperature sensor, part number PS820208. If it is faulty, then replace it to solve the problem. We have attached the relevant video link that will help you with the installation of the temperature sensor. The video is not model specific but will help you. Glad to be of assistance!
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
