DWE7480 (Type 20) DeWALT Table Saw - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The spring clip broke
Simple as removing the screw holding the broken one and replacing it with the new one. The screwing it back in.
One note is that the new spring clip seemed to be very difficult to open and allow the push stick in. But this quickly loosened up and works great now.
One note is that the new spring clip seemed to be very difficult to open and allow the push stick in. But this quickly loosened up and works great now.
Parts Used:
-
Robert from Palm Bay, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!