DWA53AW (P1318607W) Amana Dishwasher - Overview
Sections of the DWA53AW
[Viewing 6 of 6]Keep searches simple, eg. "belt" or "pump".
Washer Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$11.80
In Stock
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.07
In Stock
Washer Screw 818 X 1/2
PartSelect #: PS11741443
Manufacturer #: WP3390631
This screw is sold individually.
$10.09
In Stock
Bottom Door Gasket
PartSelect #: PS2173884
Manufacturer #: R9800180
*Gap in seal to allow for airflow in the dry cycle.
No Longer Available
Door Gasket
PartSelect #: PS11752626
Manufacturer #: WPW10314643
It provides a seal between the tub and the door.
$96.90
Special Order
Dishwasher Door Latch Assembly
PartSelect #: PS11751007
Manufacturer #: WPW10247175
This door latch assembly is for dishwashers.
The door latch assembly is at the top of the dishwasher door and keeps the door closed when the dishwasher is running. The assembly may include multiple...
$299.26
Special Order
Dishwasher Heavy Duty Door Spring
PartSelect #: PS11747963
Manufacturer #: WPR9900669
$45.61
Special Order
Lower Spray Arm
PartSelect #: PS1964643
Manufacturer #: W10169069
NOTE: Spray arm has been updated by the manufacture and is now straight.
$65.02
Special Order
Single Wheel with Clip
PartSelect #: PS401451
Manufacturer #: 965553
Sold as one wheel and clip - not as a kit.
No Longer Available
Questions And Answers for DWA53AW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the DWA53AW
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door Springs worn
First: I unplugged the dishwasher.
Second: I removed the two screws that hold the dishwasher in place under the counter.
Third: I pulled the dishwasher out in order to see the sides of the doors where the springs hold the door attached to the dishwasher.
Fourth: I removed the worn springs with needle nose pliers.
Fifth: I attached the new springs where the old springs were attached.
Sixth I tested to see how the door functioned with the new springs.
Seventh: I repositioned the dishwasher under the counter and secured it with the screws that I removed in step 2
Second: I removed the two screws that hold the dishwasher in place under the counter.
Third: I pulled the dishwasher out in order to see the sides of the doors where the springs hold the door attached to the dishwasher.
Fourth: I removed the worn springs with needle nose pliers.
Fifth: I attached the new springs where the old springs were attached.
Sixth I tested to see how the door functioned with the new springs.
Seventh: I repositioned the dishwasher under the counter and secured it with the screws that I removed in step 2
Parts Used:
-
Ester from LA QUINTA, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Springs that held up door were broken
I unscrewed the dishwasher brackets (2 of them) from under the counter, slid out the dishwasher. The springs (or broken springs) were visible. I removed them, popped the new ones in and viola!!! The door sprung up like it was new. Of course I slid the dishwasher back under the counter and put the screws back in. This took 15 minutes. I couldn't believe how easy it was. A repair man wanted to charge us $75 just for a service call (plus parts). I repaired for less than $25!!!!
Parts Used:
-
Nydia from Howell, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
BROKEN handle
Removed 6 inside upper door screws which allowed the front control panel drop out. then 2 star screws to remove handle assembly. reversed all to install new handle
Parts Used:
-
Wayne from Glenshaw, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!