DW80R9950MT ((AA)(0000)) Samsung Washer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I replaced the pump assembly with a new drain hose
This is not a repair for the faint of heart. You will have to pretty much disassemble the entire dishwasher to replace the main pump assembly. And it’s not cheap, between the pump assembly and the hose...it was over $300...
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump assembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump assembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
Parts Used:
-
Mark from kennewick, WA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
18 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water
1) Unplugged unit
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply valve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply valve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
Parts Used:
-
James from Big Spring, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!