This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
Introduce a refreshed level of functionality to your dryer with Samsung, Maytag, Kenmore, Amana, and Inglis's Heating Element - 5300W. Extensively unique to specific Samsung Dryer and Washer models, a...
This high-limit thermostat is a genuine OEM replacement component designed to prevent overheating in dryers by regulating internal temperature. Engineered to shut off the heating element when temperat...
Discover the Heater Duct Assembly w/ Thermostats, a crucial part compatible with Samsung and Kenmore Dryers, as well as Samsung Washers and Amana Dryers. This high-quality component boosts your applia...
Introducing the Drum Support Roller & Axle, a vital component specifically suited for Samsung, Amana, and Kenmore dryers. This premium quality product ensures a smooth tumble for your dryer drum, ther...
Enhance the performance of your home appliances with our Drive Belt, designed specifically for Samsung Dryers, Samsung Washers, Amana Dryers, and Kenmore Dryers. Made to meet the exact design specific...
Revive the wide array of your appliances including your Samsung Refrigerator, Samsung Dryer, Samsung Washer, and even your Samsung Dishwasher with the Tapping Screw, a crucial component engineered by ...
Revitalize your Samsung, Amana, Maytag, or Kenmore dryer with our robust Idler Pulley Assembly, designed to ensure long-term functionality. This part, undoubtedly an ideal replacement piece from the r...
Keep your Samsung or Amana Dryers and Samsung Washer operating at peak performance with this authentic Thermistor, also compatible with your Kenmore Dryer. Expertly produced by world-leading brands Sa...
When it's time to ensure the health and longevity of your Samsung or Kenmore dryer or Samsung washer, you need top-quality parts. That's where the Thermal Fuse DC47-00015A comes in. Designed by truste...
Upgrade your appliance with this high-quality Thermal Fuse from Samsung, Kenmore, and Amana. Expertly designed for seamless integration with both Samsung and Kenmore Dryers as well as Samsung Washers ...
Revitalize your Samsung Dryer, Samsung Washer, or Kenmore Dryer with the genuine Moisture Sensor part, a premium component directly from Samsung and Kenmore. This vital part enhances your appliance's ...
$13.95
Special Order
Questions And Answers for DVE50M7450W
Ask our experts a question about this model and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
El
March 29, 2024
hi. I'm getting an error of "dC" on my dryer. I recently change the heat assembly. The old one broke. I'm a bit confused if I should change the door switch or the door detection sensor. I'm not certain if they are the same. I'm thinking they are not based on the owner's manual. Thank you.
For model number DVE50M7450W
Hi El, thank you for reaching out. This error code indicates a problem with the door, most commonly the door switch, part number PS4210965. Check the door latch to see if it fits into its slot correctly and the door is firmly closed. If the door is closed properly and still the error appears, then you have a defective door switch, and need to be replaced to fix the issue. We hope this sorts out your problem!
Dryer will start and runs well, only after pressing the start button multiple times.
For model number DVE50M7450W
Hello Salvatore, thank you for your question. There are a few different parts you will have to check to isolate the problem. They are the Control Panel Assembly, Electronic Control Board, and Wire Harness to the control board. Let us know if you have further questions!
Was this helpful?
Thank you for voting!
Randy
March 15, 2023
Dryer run for about 10 minutes then stops heating any tips
For model number DVE50M7450W
Hi Randy, thank you for contacting us. According to our research, the issue might be with the heating element, part number PS4205218, or the high-limit thermostat, part number PS11741822. The thermostat might be cutting the gas supply prematurely, even before the burner temperature exceeds the safe operating temperature. We would recommend checking these parts for continuity using a multimeter. We hope this helps, good luck with the repair!
Hello Mickey, thank you for contacting us. Based on the description that you have provided, we would recommend checking the thermistor, part number PS4204984, to solve the problem. We hope this helps.
Well it went really well until the dryer was put back together as it still didn’t heat. The dryer was taken apart again. This time the thermistors &fuse was tested. Alas, the new fuse was faulty. After putting the car lid fuse back on n, the dryer worked again
YouTube, YouTube, YouTube. I YouTubed many videos on how to take a dryer apart to reach the drum support roller and axle. After watching numerous videos, I settled on one that had my exact model of dryer. For my dryer, previous inputs said I needed two rollers to for my model. That is not the case. My model actually has 4 rollers, 2 in the front and two in the back. I ordered 2 initially but only needed 1 thankfully since only one roller was bad. Keep it simple stupid is how I got it done. Dryer's are pretty simple machines mechanically. Don't trash your noisy dryer. We bought ours in 2014 and it only recently started giving us issues. This is after 2 moves and being run daily for a family of 6. I'm glad I found partselect.com. They saved me a ton of money.
