This part senses if the igniter is hot enough to ignite the flame for heat, allowing the gas valve to open. The sensor is three inches long and is used for many gas clothes dryers. If your dryer is no...
Introducing the Drum Support Roller & Axle, a vital component specifically suited for Samsung, Amana, and Kenmore dryers. This premium quality product ensures a smooth tumble for your dryer drum, ther...
Enhance the performance of your home appliances with our Drive Belt, designed specifically for Samsung Dryers, Samsung Washers, Amana Dryers, and Kenmore Dryers. Made to meet the exact design specific...
Revive the wide array of your appliances including your Samsung Refrigerator, Samsung Dryer, Samsung Washer, and even your Samsung Dishwasher with the Tapping Screw, a crucial component engineered by ...
Revitalize your Samsung, Amana, Maytag, or Kenmore dryer with our robust Idler Pulley Assembly, designed to ensure long-term functionality. This part, undoubtedly an ideal replacement piece from the r...
Keep your Samsung or Amana Dryers and Samsung Washer operating at peak performance with this authentic Thermistor, also compatible with your Kenmore Dryer. Expertly produced by world-leading brands Sa...
Revitalize your Samsung Dryer, Samsung Washer, or Kenmore Dryer with the genuine Moisture Sensor part, a premium component directly from Samsung and Kenmore. This vital part enhances your appliance's ...
Introducing a highly efficient retainer clip from the renowned brand, Samsung. Designed specifically for use with dryers, this part ensures that the different components stay securely in place. For sa...
The Samsung, Kenmore DC61-02740A is a high quality spring designed for specific use in Samsung Dryers, Samsung Washers and Kenmore Dryers. This essential component has been meticulously crafted to cou...
Upgrade your Samsung Dryer or Samsung Washer with this genuine Control Knob. Specifically designed by Samsung, it provides an optimal level of control and compatibility. This authentic product ensures...
First it was a process of alimination to find out why it was dropping out. After the problem was found it was just a matter of replacing the holding coil on the gas valve. Thank you fred kenney sr
I unplugged the dryer,removed the two small screws on the front of the dryer and pulled the bottom forward. The two wires connected to the door do not have to be removed. With an electrical tester using the Ohm setting I tested the Radiant sensor and the Gas Valve coils. The two terminal coil was DOA. The dryer can be operated with the front open as long as the door wires are connected. Symptons: The igniter would heat up and not release gas. My repair was successfull due to this awesome website and the super fast shipping service. AAAA++++
