This gray mounting bracket is designed to securely hold the dish rack in place inside your dishwasher during operation. Measuring 1 inch by 1 inch, it ensures stability and helps prevent the rack from...
$17.44
In Stock
Order within the next 1 hr and 31 mins and your part ships today!
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
$17.44
In Stock
Order within the next 1 hr and 31 mins and your part ships today!
If your dishwasher is leaking or not cleaning as well as it used to, the door gasket might be the culprit. This flexible rubber seal fits around the tub and keeps water and steam inside during each cy...
$82.48
In Stock
Order within the next 1 hr and 31 mins and your part ships today!
Does your dishwasher leak or isn't functioning like it used to? Don't fret ? we have a solution for you. Introducing the LG Tub Gasket, a superior tool designed specifically for your LG dishwasher tha...
This drain hose assembly is designed for use with select LG washing machines and includes both the flexible rubber hose and plastic connectors. It efficiently channels used water from the washer tub t...
$97.49
In Stock
Order within the next 1 hr and 31 mins and your part ships today!
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
$125.86
In Stock
Order within the next 1 hr and 31 mins and your part ships today!
This genuine OEM lower spray arm is a key component in LG dishwashers, featuring multiple rotating arms with high-pressure jets that distribute water evenly throughout the tub for thorough cleaning. D...
This pump casing assembly is designed for use in select LG dishwasher models and houses several key components responsible for water circulation during wash and drain cycles. It includes the motor, wh...
$462.38
In Stock
Order within the next 1 hr and 31 mins and your part ships today!
If your dishwasher isn't performing like it used to, this genuine LG Guide Assembly could be the solution you need. This essential part holds the spray arm steady, fostering a strong link to the water...
$80.21
In Stock
Order within the next 1 hr and 31 mins and your part ships today!
This grey tine row retainer is designed to securely hold the horizontal tine rows on your dishwasher rack, keeping them in place so dishes stay organized and stable throughout each wash cycle. It clip...
$17.44
In Stock
Order within the next 1 hr and 31 mins and your part ships today!
Questions And Answers for DUA513FD
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Replacing this pump is pretty easy. Disconnect the power and drain hose, and pull your dishwasher out from the counter. Lay it on its side on a towel. There WILL be spillage. Disconnecting the pump is simple. There are a couple hoses, one single wire connection (the thermistor) and one multi-wire plug. The pump is held in place by a pair of thick rubber holders which can be pulled off by hand. That's it!
After removing the pump, I disassembled it to find out why these fail so soon. It's a very poor design. I found that the nose of the electric motor, where the bearings are located, sits in a plastic cup formed by the top of the pump body. Any leakage from the pump around the motor shaft will be held in place against the motor bearing. It has no place to go. This causes rusting of the bearing. I expect I'll be replacing this one in a few years. :(
But kudos to PartsSelect for getting the right pump assembly for me, after getting the wrong one from another supplier!
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the gasket will form a better seal around the door.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
