DE6612DXEG Samsung Microwave Oven Combo - Overview

Sections of the DE6612DXEG

[Viewing 1 of 1]
NA Diagram and Parts List for Samsung Microwave Oven Combo
NA
Keep searches simple, eg. "belt" or "pump".
Tapping Screw – Part Number: 6002-000520
Tapping Screw
PartSelect #: PS4133205
Manufacturer #: 6002-000520
Revive the wide array of your appliances including your Samsung Refrigerator, Samsung Dryer, Samsung Washer, and even your Samsung Dishwasher with the Tapping Screw, a crucial component engineered by ...
$6.95
  In Stock
Tapping Screw – Part Number: 6002-000213
Tapping Screw
PartSelect #: PS4133148
Manufacturer #: 6002-000213
$6.95
  In Stock
Micro Switch – Part Number: 3405-001033
Micro Switch
PartSelect #: PS4131191
Manufacturer #: 3405-001033
Introducing the SWITCH-MICRO;125/250VAC, a versatile microwave appliance part compatible with several Samsung and Kenmore models. This durable part is designed for use with Samsung Microwaves and Sams...
$26.95
  In Stock
Synchronous Motor – Part Number: DE31-10154D
Synchronous Motor
PartSelect #: PS4223986
Manufacturer #: DE31-10154D
  No Longer Available
Tray – Part Number: DE74-00027A
Tray
PartSelect #: PS4234943
Manufacturer #: DE74-00027A
  No Longer Available
Guide Roller – Part Number: DE97-00193B
Guide Roller
PartSelect #: PS4240067
Manufacturer #: DE97-00193B
  No Longer Available
BUZZER;85DB,24V,-,2.0KHZ – Part Number: DE30-20016A
BUZZER;85DB,24V,-,2.0KHZ
PartSelect #: PS4223807
Manufacturer #: DE30-20016A
  No Longer Available
Thermostat Assembly – Part Number: DE47-20008A
Thermostat Assembly
PartSelect #: PS4226405
Manufacturer #: DE47-20008A
  No Longer Available
Thermostat – Part Number: DE47-20030A
Thermostat
PartSelect #: PS4226425
Manufacturer #: DE47-20030A
  No Longer Available
Self-Tapping Screw – Part Number: DE60-10082I
Self-Tapping Screw
PartSelect #: PS4226648
Manufacturer #: DE60-10082I
Ensure the optimal performance of your Samsung Dryer, Washer, Microwave, Microwave Oven Combo, Range, Air Conditioner, and various Laundry Accessories with the genuine Tapping Self Screw. Kenmore and ...
  No Longer Available
Flange Bolt – Part Number: DE60-20063A
Flange Bolt
PartSelect #: PS4226717
Manufacturer #: DE60-20063A
  No Longer Available
Flange Nut – Part Number: DE60-30016B
Flange Nut
PartSelect #: PS4226727
Manufacturer #: DE60-30016B
  No Longer Available
Back to Top
View More

Questions And Answers for DE6612DXEG

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the DE6612DXEG

[Viewing 1 of 1]
Won’t turn on
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Turntable Quit
Snipped four corners off inspection panel,removed one phillips screw and two elect. Connections. Reverse process.
Parts Used:
Synchronous Motor
  • RICHARD from OKLAHOMA CITY, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thermostat failed because rivet was loose on connector blade; caused overheated wiring.
Replaced the the thermostat located above the magnetron.
Parts Used:
Thermostat
  • Ray from GRANBURY, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Power cuts in and out; runs for a few secs then powers off
Disconnected power and removed Microwave housing cover, observed burned end plastic connector of wire connecting to the thermostat (or thermal overload sensor); slightly wiggle one of the 2 wires to the thermostat would cause microwave power to cut out (when plugged in power). When powered on, I would try to run it but power cuts out after just a few seconds. Removed the 2 wires from the old thermostat, removed the 2 screws that fasten down the thermostat, replaced with new thermostat and reapplied the 2 screws; cut off burned part of wire and resolder to new wire connector; reconnect both wires to new thermostat and reinstall MW housing cover. MW works good as new again. Thank you PartSelect!
Parts Used:
Thermostat
  • Vinh from Houston, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More