Used with some portable dishwashers and washers. NOTE: As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers.
This high pressure inlet hose washer is black. It is an inch in diameter, made of rubber, and used with many washing machines, refrigerators, and dishwashers.
So I decided to stick in some CLR to see if it would clean it up. Well it got considerably worse. So ordered the new faucet adapter, threaded adapter and the two washers, due to not knowing what i would need. It came like unbelievably fast considering it was Christmas time. Unscrewed the old one from the faucet, screwed on the new one. hooked up the dishwasher, watched it for a bit for any leaks at the connection, and it worked great! I seem to have more water pressure too coming from the sink faucet. Thank you so much for the quickness in sending out my order! -- Scott
Ordered gasket 13 may, received in mail 27 may. Enlarged instructions for easy reading. Removed sliding drawers from inside dishwasher removed door panel and panel at bottom of door to expose nut holding bottom clip removed philips head screw holding bottom clip and used flat blade screw drive to pull gasket fasteners (clips) holding old gasket in place. Removed old gasket. Installed new fasteners on new gasket, did not need to use plyers to install clips installed gasket junction wire at bottom of gasket and formed gasket to fit dishwasher, installed new gasket on fasteners in dishwasher used handle end of screwdriver to push clips in place, reinstalled new bottom wire clip and used 1/4 in ratchet with socket to secure nut on end of screw holding bottom clip in place. Put slideing drawers back in dishwasher door closed and latched ok so I washed a small load of dishes to check for water leak. No water leak reinstalled door panel and bottom panel on dishwasher.
