This NSF-certified refrigerator water filter is engineered to improve the taste, clarity, and safety of your drinking water by reducing contaminants such as mercury, lead, and trace pharmaceuticals. D...
The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the sw...
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
Fix a freezer door that won’t close properly with this genuine spring hinge mullion. It keeps the flipper seal tight, preventing warm air from entering and helping maintain the right temperature. If y...
This is a replacement set screw for your refrigerator door. The set screw attaches the door handle to the stud on the refrigerator door. The screw is approximately ¼ of an inch in length and unlike so...
Need more space in your fridge door? This clear plastic bin is a great replacement for select GE, Hotpoint, and Café refrigerators. It’s gallon-sized, fits on the right-side door, and helps keep drink...
Get your GE refrigerator back to its peak performance with our GE Water Inlet Valve Assembly. This essential part is your solution to continuous functionality of your ice maker and water dispenser. It...
This LED light and cover assembly is designed for the fresh food compartment of compatible refrigerators, providing bright, energy-efficient illumination to help you easily see and access stored items...
Is your GE refrigerator in need of a little repair? Our Left Hand Ice Door Mid Bin is just what you need. Designed specifically for GE refrigerators, this sturdy bin fits neatly inside your refrigerat...
If your fridge is building up too much frost or not cooling evenly, this defrost thermostat might be the issue. It helps control the temperature during the defrost cycle by shutting off the heater whe...
$37.95
Special Order
Questions And Answers for CYE22TSHBSS
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Julie
February 9, 2020
My fridge dysplay is not working... the function buttons does'nt response...they stopped working...
For model number CYE22TSHBSS
Hello Julie,
Thank you for your question. Our sources suggest replacing the LCD display control board under part PS12703577 to fix the display issues. We hope this helps.
Was this helpful?
Thank you for voting!
Catherine
December 19, 2022
the door latch to the ice bin/dispenser broke. I see I can order the latch, latch cover and screws. needed to repair/replace. However. Can you direct me on how to get the bin door open when the handle broke off ? It seems nearly impossible without breaking the latch cover. Please help. I have chosen the parts recommended for this model number based on your site diagrams. They are item numbers: 121, 122, 123 and 124 for this model. Thank you !
For model number CYE22TSHBSS
Hi Catherine,
Thank you for your question. Based on our research, here are the steps that should help you: 1) Unplug the power cord before conducting any repair. 2) First pull off the door trim. 3) Pull the gasket back and detach the gasket retainer from the door liner. 4) Use a Phillips head screwdriver to remove the screws securing the old door latch. 5) Install the new door latch by inserting it into the gasket retainer. 6) Replace the screw to secure. 7) Place the edge of the gasket retainer behind the lip of the door frame. 8) Tuck the retainer spring into the slot in the liner then snap the retainer back into place. 9) Reinstall the door trim. 10) Plug the power cord back in and confirm that the door closes and latches properly. Hope this helps. Best Regards.
Was this helpful?
Thank you for voting!
Therese
April 19, 2025
Bracket for rolling bin located in bottom freezer
For model number CYE22TSHBSS
Hi Therese, thank you for reaching out. The right side bracket is part number PS8758356, and the left side is part number PS8758357. We hope this is what you were looking for!
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.
I went on line to see if there were others having this same problem and found that there were many with the same problem.
After reading some of the ways that people found out what was wrong ...it became a matter of three components, the timer, heater or thermostat.
I tried the most common component and the less expensive one first , the thermostat switch I installed it very easily snipping two wires and attaching the news using wire nuts I used the diagram on this website to pinpoint the component and there has not been a problem since.
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
