This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This spade style bake element with push on wire terminals is 16 inches wide. It has a terminal depth of three inches and a total element length of nineteen inches. This element comes with an instructi...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maurice
February 18, 2020
How do i change the bulb in the top oven?
For model number CWE5800ACB25
Hello and thank you for writing.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair.
https://www.youtube.com/watch?v=kSohIGunxBw&feature=emb_title
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tony
March 8, 2023
When i turn on the top oven I hear a noise that sounds like the fan blade is hitting something but it is not. No noise from bottom oven
For model number CWE5800ACB25
Hi Tony, thank you for contacting us. We would recommend checking the screws of the panel, part number PS2376544, to see if they are loose. When using gas, the oven will have small vibrations that are part of the process. However, that vibration causes the loose panel or screw to vibrate and rattle around, causing a loud noise. If the problem remains, the issue might be with the door latch, part number PS3488700. If you hear the noise coming from the front, it might be due to a loose door latch that vibrates when the unit starts. Still, if the fan blade is not hitting anything, it might cause noise due to rusting or clogging in the fan shaft. Clean it thoroughly to assure smooth functioning. We hope this information is useful!
Hi,
what's the quickest way to access the upper door hinges to replace them? do i need to pull the unit out of its pocket?
TY
Mike
For model number CWE5800ACB25
Hi Michael, Thank you for choosing us for the repair. Replacing the hinge will require partially removing your oven from the wall, to access the hinge. Good luck!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I threw away the old pieces.
Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and tightened them in.
SUPER EASY!!!!!
This $40 part saved me $1500 on a new double wall oven.
Removed 2 screws, pulled element out. My husband used an ohmmeter to see if the electricity needed to be turned off. It showed no voltage. He could not remove electrical connectors by hand, so he used insulated pliers. When he touched the connectors, a shower of sparks covered the inside of the oven and tripped the breaker switch. Then we noticed the pliers were welded to the side of the oven. Thankfully the pliers had insulated handles and he was not hurt. It might be a good idea to put in the instructions to TURN OFF POWER TO OVEN in the breaker panel because our oven was definitely HOT. Oven works perfectly now.
I removed two retainer screws which released the outside panel. Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets. The was another panel with 4 screws to remove before reaching the final glass inner assembly. Once that panel was reoved with the broken glass it was time to put the repacement glass assembly back together.