This water filter improves water quality in select refrigerators by reducing lead, VOCs, and 50+ impurities. NSF-certified (42, 53, 401), it ensures clean, fresh-tasting water. Located in the upper-ri...
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
If you're struggling with a refrigerator that's not running like it used to, the GE Set Screw could be your solution. This small but mighty piece is crucial for your fridge's efficiency and performanc...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kenneth
January 5, 2023
The plastic handle that is on the inside ice tray panel has broken off. How do I get a replacement?
For model number CVE28DP3NBD1
Hello Kenneth, thank you for the question. The part you are looking for is not sold separately, you will have to order the Ice Bucket and Crusher for it, the part number is PS12744044. If you require assistance placing an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Jack
September 22, 2023
I cannot find the dairy bin door replacement. A pin is broken. It attaches to the bin on the top top right hand side of the refrigerator
For model number CVE28DP3NBD1
Hi Jack, thank you for the question. This dairy door bin, part number PS12744165, has a door with it. The door is not sold separately, you will need to replace the whole dairy door bin. We hope this information helps!
Was this helpful?
Thank you for voting!
Cw
February 18, 2025
Why does the water dispenser work and the ice maker won't fill?
For model number CVE28DP3NBD1
Hello Cw, thank you for getting in touch. If your water dispenser works but the ice maker will not fill, the most likely reason is a blockage in the water supply line leading to the ice maker. We would recommend cleaning the water line first. If the problem persists, then you may need to check the water inlet valve assembly, part number PS12744135, to solve the problem. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Unpluged refrigerator, Removed 1 screw, removed cover, unplugged 2 wiring harnesses, removed second screw in icemaker lifted up icemaker, put new icemaker in pulled down to catch in hooks.installed screw in icemaker, Reconnect 2 wiring harnesses, put wiring harnesses into cutout installed cover, put screw into cover. Plugged refrigerator back in set up icemaker by morning the bucket was full of ice.
unplugged the electrical connection from the wall, took out the top and bottom shelves from the freezer (freezer located in the lower part of fridge) took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw. with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator. placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
