Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not ba...
This is a surface burner infinite switch kit for your range or oven. This replacement part activates and deactivates your burner, and controls the burner heat. If you are not getting any heat to your ...
If your cooktop isn’t heating evenly or one of the burners won’t turn on, this dual radiant surface element could be just what you need. With two heating zones—a smaller 6-inch ring and a larger 9-inc...
$297.95
In Stock
Questions And Answers for CPES389DC4
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Siobhan
June 30, 2021
Our left side hinge on the oven door has snapped and it looks like the hinge is unavailable, are there any other options?
For model number CPES389DC4
Hello Siobhan, Thank you for the question. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call Frigidaire and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
February 11, 2020
Dimensions of range (width,depth,height)
For model number CPES389DC4
Hello and thank you for writing.
Height 47.75 inches, Width 29 7/8 inches, Depth 25.75 inches, capacity 5.3 cubic feet.We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Aline
May 26, 2022
Est-ce qu’il est possible d’installer un nouveau joint d’ étanchéité sur la porte de notre cuisinière et si oui peut-on l’acheter chez-vous et à quel coût? Merci
For model number CPES389DC4
Bonjour Aline, Merci de nous avoir contacté. Nous avons recherché le modèle que vous avez fourni et avons trouvé la pièce que vous recherchez est le numéro PartSelect PS442156. Si vous avez besoin d'aide pour passer une commande, le service client est ouvert 7 jours sur 7. N'hésitez pas à nous appeler. Nous avons hâte d'avoir de tes nouvelles!
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was easy and took less that 15 min. The oven works as good as new and I saved alot of money by doing it myself.
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
