CMXGKAME2979 (Type 0) Craftsman Edger - Overview

Sections of the CMXGKAME2979

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Sprocket – Part Number: 9054-CM
Sprocket
PartSelect #: PS17777167
Manufacturer #: 9054-CM
  No Longer Available
SHORTBLOCK ASM – Part Number: 753-06663
SHORTBLOCK ASM
PartSelect #: PS18475341
Manufacturer #: 753-06663
  No Longer Available
SCREW:SHOULDER .37 – Part Number: 738-0706D
SCREW:SHOULDER .37
PartSelect #: PS18469633
Manufacturer #: 738-0706D
  No Longer Available
CRANKCASE COVER – Part Number: 841-020721S
CRANKCASE COVER
PartSelect #: PS18485952
Manufacturer #: 841-020721S
  No Longer Available
STARTER HOUSING (LIB RED) – Part Number: 841P020981S
STARTER HOUSING (LIB RED)
PartSelect #: PS18486020
Manufacturer #: 841P020981S
  No Longer Available
SCR:TRS:M5X0.8 – Part Number: 710-04604A
SCR:TRS:M5X0.8
PartSelect #: PS18463930
Manufacturer #: 710-04604A
  No Longer Available
CARRIAGE BOLT 1/4-20X.50 – Part Number: 710-05177
CARRIAGE BOLT 1/4-20X.50
PartSelect #: PS18463975
Manufacturer #: 710-05177
  No Longer Available
WIRE LEAD – Part Number: 9681
WIRE LEAD
PartSelect #: PS18490221
Manufacturer #: 9681
  No Longer Available
SPINDLE PLT MNT – Part Number: 787-01505
SPINDLE PLT MNT
PartSelect #: PS18484141
Manufacturer #: 787-01505
  No Longer Available
Screw – Part Number: 710-0599-CM
Screw
PartSelect #: PS17055832
Manufacturer #: 710-0599-CM
  No Longer Available
BEARING-BALL – Part Number: 741-04547
BEARING-BALL
PartSelect #: PS18469768
Manufacturer #: 741-04547
  No Longer Available
ARM ASM:PIVOT HSLA – Part Number: 687-02582S
ARM ASM:PIVOT HSLA
PartSelect #: PS18457999
Manufacturer #: 687-02582S
  No Longer Available

Questions And Answers for CMXGKAME2979

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the CMXGKAME2979

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
One of the two fuel lines cracked and leaking
Removed the 6 screws holding the red plastic cover, tank, and the old fuel lines from the carburetor. Placed the new tank in the sunlight for a few minutes to soften the new fuel lines. Then attached the new lines to the carburetor and replaced the cover
Parts Used:
Fuel Tank Asm
  • Robert from ORANGE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!