CGP70362N2S1 General Electric Range - Overview

Sections of the CGP70362N2S1

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
BUMPER – Part Number: WS01A02446
BUMPER
★★★★★
★★★★★
(1)
PartSelect #: PS11737255
Manufacturer #: WS01A02446
$8.88
  In Stock
BURNER CAP Assembly (15000) - WB28K10222 – Part Number: WS01F02544
BURNER CAP Assembly (15000) - WB28K10222
★★★★★
★★★★★
(1)
PartSelect #: PS9864222
Manufacturer #: WS01F02544
$24.07
  In Stock
BURNER CAP Assembly (9500) – Part Number: WS01F02536
BURNER CAP Assembly (9500)
PartSelect #: PS10056220
Manufacturer #: WS01F02536
$41.18
  In Stock
Economic Nut – Part Number: WB01K10037
Economic Nut
PartSelect #: PS951649
Manufacturer #: WB01K10037
This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and ...
$19.28
  Special Order
STRAIN RELEF – Part Number: WB2K5275
STRAIN RELEF
PartSelect #: PS241555
Manufacturer #: WB2K5275
  No Longer Available
SUPPLY INLET – Part Number: WB04T10082
SUPPLY INLET
PartSelect #: PS8753691
Manufacturer #: WB04T10082
$617.95
  Special Order
SEAL MANIFOLD – Part Number: WB04T10084
SEAL MANIFOLD
PartSelect #: PS8753693
Manufacturer #: WB04T10084
$21.95
  Special Order
SCR 10-32 GX HXW 7/16 S – Part Number: WS02X10087
SCR 10-32 GX HXW 7/16 S
PartSelect #: PS8759071
Manufacturer #: WS02X10087
$13.95
  Special Order
CONTROL BOARD LED – Part Number: WB27T11382
CONTROL BOARD LED
PartSelect #: PS8754540
Manufacturer #: WB27T11382
$211.16
  Special Order
STANDOFF – Part Number: WB02T10207
STANDOFF
PartSelect #: PS951837
Manufacturer #: WB02T10207
$13.95
  Special Order
SEAL CNTL (Black) – Part Number: WB04T10042
SEAL CNTL (Black)
PartSelect #: PS952314
Manufacturer #: WB04T10042
Having trouble with spills on your GE cooktop? You might need a new Control Panel Seal. This part is a crucial player in keeping those accidental spills from sneaking under the control panel where the...
$27.44
  Special Order
IGNITERS AND HARNESS Assembly – Part Number: WB18X29353
IGNITERS AND HARNESS Assembly
PartSelect #: PS12296166
Manufacturer #: WB18X29353
  No Longer Available
View More

Questions And Answers for CGP70362N2S1

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Electrode would produce spark to lite burner
The following are steps in replacing a burner electrode for GE Profile Cook Top Model PGP7030DL1BB
1. Shut off gas and unplug electrical plug
2. Remove all stove grates and turn on knobs
3. Remove all burner covers
4. Remove all screws [three for each burner]
5. Remove two screws near front by removing rubber grate grommets
6. Carefully Lift off stove cover and set aside
7. Remove shield near back of stove top. This exposes all burner wires
8. Remove electrode to burner which does not lite by sliding out clip at bottom of electrode—note color code of wire and replace with same. Change one electrode at a time to insure wire color code is correct.
9. Reassemble in reverse order of steps 1-8

HAVE A NICE DAY
Parts Used:
IGNITERS & HARNESS Assembly
  • terry from NAPLES, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More