The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
This vent grille mounts on the top of the microwave above the door. This vent grille is for microwaves.
Vent grille covers components inside the microwave while allowing airflow through the slats....
$263.72
In Stock
Questions And Answers for CGMV174KFC
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
June 23, 2022
My display has dimmed down. How can I get it bright again?
For model number CGMV174KFC
Hello Patrick, Thank you for the question. In order to correct the dim light the LED control will need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
The light is on constantly and all the buttons work but the microwave won't turn on. Seems to be an issue. Would you know the possible part to fix the problem.
Thanks,
For model number CGMV174KFC
Hi Nelson, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the door switch, part number PS8769124, as it is the most likely cause of this issue. If it is faulty, you may need to replace it. We hope this solves your problem!
The light stays on but all the buttons work. Seems to be an issue with the door handle. Do you have a part or parts solution.
Thanks
For model number CGMV174KFC
Hello Nelson, thank you for reaching out. Based on our understanding of the issue, we would suggest you replace the door switch, part number PS8769124, to fix the issue. Good luck with this repair!
My microwave isn’t heating.Everthing else working fine.what could be the problem.
For model number CGMV174KFC
Hi Claudine, thank you for your question! We have found that the issue is most probably because of the high voltage diode, part number PS2339491. The diode converts alternating current input voltage into direct current output voltage. We would recommend checking the diode to fix the issue. We hope that helps!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .