This is a replacement rack for your oven. The oven rack fits into grooves on the side of the oven wall, and acts as a shelf that you can place food items on when you want to cook them in the oven. Thi...
$155.14
In Stock
Order within the next 5 hrs and your part ships today!
Order within the next 5 hrs and your part ships today!
Questions And Answers for CGEF3055MFG
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
January 6, 2020
Oven element barely heats up and broil element will not heat to the Max. Does not become red ... what could be the cause of these problems ... our original unit had this same problem but was under warranty, they wouldn't bother fixing it , they just replaced it at the time, this is a replaced unit but with the same problem and two months out of warranty ... seems like coincidence ... chuckle ... please help ...
For model number CGEF3055MFG
Hi mike, if both are having problems heating It may be a faulty temp probe. Thank you for your question and good luck with your repair!
The 6789 numbers on the electronic oven control no longer work. Is there a repair for this other than replacing the entire oven control.
For model number CGEF3055MFG
Hello and thank you for writing.
No, you would have to replace the faulty board itself PS9494056 is in the list of compatible parts for your model. We hope this helps. Please contact us anytime if you require further assistance.
My oven is heating incredibly slowly. It worked great until i used the broil function, now it is taking an hour to heat to 200 degrees. The stove top still works well.
For model number CGEF3055MFG
Hello and thank you for writing.
It certainly sounds like it could be a faulty oven probe and/or main terminal block you should check the part(s) for signs of damage, and replace it as needed. Please see the part links related to this question just beneath this answer. We hope this helps. Please contact us anytime if you require further assistance.
The keypad was having some intermittant issues. Recently the range began beeping randomly and displayed an F12 error. We turned off power for a few hours and the beeping and error restarted when power was restored.
Does this mean a new overlay or overlay and control board? Or if not that, what should I do?
For model number CGEF3055MFG
Hello Luke, thank you for your question. The error code F12 indicates that the display control board is shorted and needs to be replaced. The part number for the control board is PS9494056. We have attached a relevant video to assist you with the replacement. Please reach out to customer service if you need help placing an order. Glad to be of help!
After running the clean cycle the bake and broil elements don’t work is it the fuse and if so where is it and what does it look like?
For model number CGEF3055MFG
Hello Rachel, thank you for the question. Based on the description, you may need to replace the temperature sensor, part number PS1528542, to fix the issue. We hope this solves your problem!
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
