Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
$80.31
In Stock
Order within the next 5 hrs and your part ships today!
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
$30.38
In Stock
Order within the next 5 hrs and your part ships today!
This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not ba...
$212.74
In Stock
Order within the next 5 hrs and your part ships today!
Struggling with an unstable or worn-out oven rack? We have the simple solution to get your oven back to perfect working order - the robust Frigidaire Oven Rack. This dependable part offers a sturdy pl...
Order within the next 5 hrs and your part ships today!
Questions And Answers for CFEF372ES2
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stuart
February 13, 2020
My oven was working. Then hears a noise and a small Flame on the bottom element. Now both my elements are not working but the burners are working and the clock is still working. What do you think may have happened? Bad fuse? Replace both stove elements?
For model number CFEF372ES2
Hi Stuart,
Thank you for your question. If the bake element burnt out, it will need to be replaced. If the broil element is not coming on, you will need to test it with a multi-meter to see if it is has continuity. Verify that you have disconnected the appliance from the power source before beginning. Locate and inspect the element’s terminals. They can be accessed by removing the back panel of your oven. You will be looking for signs of overheating or damage. If no issues are found during your inspection, remove the element from your range in order to test it. Using a multimeter on the Rx1 setting, touch the element’s terminals with the probes. The reading of a functional element varies between models but will likely fall between 19 and 115 ohms. Check your owner’s manual to find what reading a functional element from your model will produce. If your element does not have continuity or is visually damaged, you will need a replacement broil element. If the broil element is fine inspect the wiring and make sure everything is fitted correctly. We hope this helps. Thank you and have a great day.
Hello... my oven does not start, but evereything else works fine for the stove and timer. Both the baking and broil elements won't eat at all but the preheat light is on. My electric range model is CFEF372CS2 was bought in 2005. Can it be repaired or should I buy a new one? Thank you. Johanne
For model number CFEF372ES2
Hello Johanne, thank you for your inquiry. According to our research, we would recommend checking the following parts to fix your issue: Temperature Sensor, part number PS820208, Terminal Block Kit, part number PS471605, Oven Bake Element, part number PS3633414, and Broil Element, part number PS3506411. If you require assistance to place an order, please contact customer service. We hope that helps!
My unit made a loud pop noise and i had to turn the breaker back on. Now, my unit works if plugged in but i can not use any functions. I can't set the clock, and it beeps every 30 seconds. When i plug it in it shows f1 on the screen.
For model number CFEF372ES2
Hi Lisa, thank you for your question. It sounds like you would need to replace your electronic control board: PS1149617. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was easy and took less that 15 min. The oven works as good as new and I saved alot of money by doing it myself.
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
