CCHS995SEL1SS General Electric Range - Overview
Sections of the CCHS995SEL1SS
[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor Kit
PartSelect #: PS236490
Manufacturer #: WB23X5340
This kit includes the sensor as well as the connectors. NOTE This sensor is 2" long.
$124.11
Special Order
Range Leg Leveler
PartSelect #: PS2339673
Manufacturer #: WB02K10182
Having trouble with your wobbly GE range? Our adjustable leveling leg is the simple solution you've been looking for. When your range isn't sitting perfectly even, it can lead to a host of issues from...
$14.95
Special Order
OVEN RACK
PartSelect #: PS8768340
Manufacturer #: WB48X21508
Sold individually.
$97.48
Special Order
Oven Light Housing
PartSelect #: PS230438
Manufacturer #: WB08T10002
Must buy bulb locally as per manufacturer.
$75.57
Special Order
Range Screw
PartSelect #: PS222157
Manufacturer #: WB01T10008
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
$13.95
Special Order
Terminal Block Kit
PartSelect #: PS953027
Manufacturer #: WB17T10011
This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$160.47
Special Order
Range Board Sensor
PartSelect #: PS12170456
Manufacturer #: WB27X28659
Facing trouble with your GE range? Our GE cooling fan sensor board is here to solve your problem. This key part accurately monitors the speed of your cooling fan and communicates the info to the main ...
$33.95
Special Order
Questions And Answers for CCHS995SEL1SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
December 17, 2024
do you control board cchs995sel1ss for this model
For model number CCHS995SEL1SS
Hello Michael, Thank you for writing. The Glass Touch Pad with the Board is listed as PartSelect #: PS12303867. Thank you for the inquiry, good luck with the repair!
Was this helpful?
Thank you for voting!
Related Parts:
GLASS & TOUCH BOARD Assembly
$1398.61
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the CCHS995SEL1SS
[Viewing 5 of 5]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
terminal block melted
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Parts Used:
-
jonathan from willow springs, IL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
54 of 75 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven sensor was not holding temperature range.
-
CHARLA from NEW BRAUNFELS, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
47 of 80 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Lamp Holder Burned
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
Parts Used:
-
Jack from Okmulgee, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
24 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!