C950-52021-0 Craftsman Snow Blower - Overview
Sections of the C950-52021-0
[Viewing 12 of 12]
Keep searches simple, eg. "belt" or "pump".
Nut 8Pk
PartSelect #: PS10051503
Manufacturer #: STD541031
During the installation process, a wrench will be needed to replace this part. It may become broken or stripped and will need to be replaced. It is an authentic OEM sourced item which is specially pro...
No Longer Available
Flat Washer, 8Pk
PartSelect #: PS10051549
Manufacturer #: STD551031
This is sold as a set that contains eight washers. These parts attach to the tank and are made out of metal. They are genuine items that are supplied by the original equipment manufacturer for use wit...
No Longer Available
Washer 8Pk
PartSelect #: PS10051550
Manufacturer #: STD551037
This replacement washer is supplied by the original equipment manufacturer for use with Craftsman equipment. It helps to distribute the pressure evenly and provide a tight seal between the connected p...
No Longer Available
Locknut
PartSelect #: PS10051527
Manufacturer #: STD541431
This replacement item is supplied by the original manufacturer for use with Craftsman lawn and garden equipment. It is an identical replacement for a missing or a faulty locknut that was installed on ...
No Longer Available
203 Brg
PartSelect #: PS10051329
Manufacturer #: STD315235
This authentic manufacturer-sourced part which is specially designed for use with Craftsman equipment. The ball bearings are generally utilized to reduce the friction between rotating parts. The balls...
No Longer Available
Screw 5Pk
PartSelect #: PS10051440
Manufacturer #: STD523107
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The special screw is used with several different models of compressors and the app...
No Longer Available
Questions And Answers for C950-52021-0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the C950-52021-0
[Viewing 3 of 3]Drive system does not work
Fixed by
these parts
these parts
Show All
Auger will not turn
Fixed by
these parts
these parts
Show All
Will not blow snow
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Refurbishing for next winter season
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Parts Used:
-
Kenneth from ALDAN, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set, Wrench set
8 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!