This genuine OEM replacement drain valve is designed for use with a variety of DeWalt air compressors. Made from durable metal, it allows you to easily open or close the valve with just a quarter turn...
$18.71
In Stock
Order within the next 6 hrs and your part ships today!
This item has been sourced from the original manufacturer to be used with pressure washers and air compressors from Porter Cable, DeWalt, DeVilbiss, Black & Decker, and Delta. The air-filled wheel att...
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure...
This authentic item is supplied by the original equipment manufacturer for use with portable air compressors and pressure washers. It is an identical replacement for a missing or a damaged knob that w...
No Longer Available
Questions And Answers for C3151
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
1 remove cover 2 unhook air line to tank 3 remove head bolts 4 remove intake from head 5 remove flywheel bolt to free up pump piston 6 remove screw on top of piston to change out gasket 7 remove the cylinder sleeve install piston from the top 8 reassemble piston rod end and the flywheel 9 on the head cover are two gaskets one on top and one on the bottom head 10 insert intake piece and bolt the head cover back in place 11 reinstall the air line and unit cover and secure with three cover screws
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements. My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
