C2002-WK (Type-6) Porter Cable Compressor - Overview
Sections of the C2002-WK
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
TUBE SEAL
PartSelect #: PS12522478
Manufacturer #: N044359
This replacement tube seal is designed to prevent air leaks and maintain efficient compressor performance. Sold individually, it fits securely onto the outlet tube that connects to the head of the com...
$5.95
In Stock
Questions And Answers for C2002-WK
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the C2002-WK
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn piston rod and sleeve
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Parts Used:
-
Donald from BRYAN, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
7 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The compressor was getting air
Put the seal in and it ran like a champ. No vacuum leak and it now runs again!
Parts Used:
-
Linda from CARO, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
3 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!