This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly...
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
This 6-pin shift actuator is a genuine replacement part designed for use in select washing machines. It plays a critical role in controlling the movement of the transmission, allowing the appliance to...
This suspension rod kit includes four rods that stabilize the wash tub, reducing vibrations and movement during cycles. It is compatible with a range of washing machines and helps improve performance ...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This p...
This washing machine drain pump is an essential component responsible for efficiently removing wastewater during the drain cycle. Located at the bottom of the appliance, it operates by generating suct...
Struggling with a leaky washing machine? Don't despair! The Whirlpool Washer Tub Seal is here to save the day. Think of this as the secret weapon in your washer's arsenal. Nestled in the heart of your...
$81.91
In Stock
Questions And Answers for ATW4675EW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Felipe
August 24, 2023
cold water does not come out of my washing machine:(
For model number ATW4675EW0
Hi Felipe, thank you for the great question. We have concluded that the issue is with the water inlet valve, part number PS11773194. It controls the cold and hot water flow into the washer. We hope this solves your problem!
I recently changed the shift actuator and the split h it ran fine for the first load on the second load it made a very loud grinding noise now it will not spin not sure if it’s even agitating
For model number ATW4675EW0
Hello Cynthia, thank you for reaching out. Based on our understanding of the issue, we would suggest replacing the gearcase, part number PS16220913, to solve the problem. It drives the agitator and spins the basket in the washer. We hope that helps!
My washer shakes hard and bangs during the spin cycle.
For model number ATW4675EW0
Hello Jared, thank you for getting in touch. A washing machine is banging or shaking hard during the spin cycle because of worn suspension rods or an unbalanced load. Check the suspension rods, part number PS11703288, which connect the tub to the washer's chassis, for cracks or bending. If the rods are worn out or bent, the washer will shake. We hope this helps.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Replaced the 4 suspension rods/springs. Only disconnect and replace one at a time. The tub will fall out if you disconnect and replace more than one rod/spring at a time.
