This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator in...
Having trouble with your Whirlpool refrigerator's crisper drawer? Re-energize your fridge with our easy-to-install crisper drawer slide rail! This hard-wearing part is the backbone of your drawer, ens...
This defrost heater element melts frost from the evaporator fins in refrigerators. Unplug the refrigerator before installing and wear work gloves for safety. Verify compatibility with your model.
This Refrigerator Ice Maker Installation Kit connects the house water supply, to the refrigerator for ice maker and water dispenser operation. This kit includes 15-ft of copper tubing, (1) saddle valv...
This fan blade circulates air within the appliance to support temperature control and efficient performance. Proper airflow helps maintain consistent conditions and protects internal components from o...
This cabinet roller supports smooth movement of the appliance or internal components by reducing strain and maintaining alignment. It is commonly replaced when rolling becomes difficult, uneven, or noisy.
This hinge pin supports proper door alignment and smooth movement during opening and closing. Replacement is recommended when doors sag, bind, or fail to close evenly.
The reason I repaired it myself was because the repairman that diagnosed the problem.didn't come back in two weeks. The evaporator fan sits behind a vented wall in the freezer and directs cold air into freezer and refrigerator.I removed the ice make assembly first and then the freezer wall held in place by two sheet metal nuts. Then removed wires from fan motor. Removed the fan blade from fan motor,which was press fitted on,then removed fan motor from bracket assembly(make sure and retain the two vibration rubber washers on back and front of motor. Reinstall new motor with vibration washers and press fan blade on new motor. Install in bracket assemble and reassemnble.
Looked up problem in your troubleshooting section, determined necessary part, ordered part on Saturday. Received part Tuesday. Installed in about 10 minutes. Works great. Saved about $200.00.
