AR140B Jenn-Air - Overview
Models starting with AR140B
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Cartridge Male Contact Spade
PartSelect #: PS1988157
Manufacturer #: Y708572
This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.
$17.68
In Stock
Surface Element
PartSelect #: PS11764903
Manufacturer #: W10823693
We know you trust the performance of your Whirlpool appliance, and it can be frustrating when it doesnt function like it used to. Thats why the Whirlpool ELMNT-SURF radiant surface element is crucial ...
$250.36
In Stock
Range Burner Cartridge Terminal Block
PartSelect #: PS11757594
Manufacturer #: WPY708730
No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.
$77.75
In Stock
ELMNT-SURF
PartSelect #: PS11764910
Manufacturer #: W10823702
Do you need your kitchen range to function optimally? Then the Whirlpool ELMNT-SURF 6" Radiant Surface Burner with Limit Switch is exactly what you're looking for. This authentic OEM part holds the ke...
$291.43
In Stock
Range Terminal Block Insulator
PartSelect #: PS1641107
Manufacturer #: 708834
This part fits inside your range's terminal block to act as an insulator for the contact spade.
$29.12
Special Order
Refrigerator Screw
PartSelect #: PS11742713
Manufacturer #: WP488234
This screw is sold individually.
Size: 8-32 x 1/4 inch.
$11.57
Special Order
Rivet
PartSelect #: PS11738861
Manufacturer #: WP210720
This rivet is an inch and a half long. It is used for many washing machines, microwaves, refrigerators, dryers, and ranges. Use of this rivet requires a rivet tool.
$26.58
Special Order
Common Symptoms of models starting with AR140B
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
6" burner on the radiant surface started smoking and burned out.
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit. Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.
Parts Used:
-
Johnny from Henderson, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
25 of 38 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The top would not heat,large or small eye.
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder.
Parts Used:
-
Calvin from Merced, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
29 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Jenn--Air cook top inop. Model discontinued
Our Jenn-Air cook top is 25 years old. One can no longer order parts for this old of model. We ordered new SS burners as well as new Burner cartridge terminal blocks for a new and current model. They work perfectly. Took 10 minutes. $ 350 dollars verses $ 2600 for a new JennAir range plus instillation. Unit looks and works great. Plan to order new switches next.
Parts Used:
-
Ronald from Avon, CO
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
23 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!