ALZ8580ADS Amana Cooktop - Overview
Sections of the ALZ8580ADS
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Top Burner Igniter
PartSelect #: PS2082000
Manufacturer #: 74004053
This top burner igniter comes with a mounting bracket.
$35.46
In Stock
Rubber Grommet
PartSelect #: PS2202491
Manufacturer #: Y8007P02060
Used as the bottom feet of a gas stovetop grate. Sold individually.
No Longer Available
Ignition Knob
PartSelect #: PS2081927
Manufacturer #: 74003944
This small black knob is used to turn on the igniter.
$26.87
In Stock
Burner Head Cap with Spark Electrode
PartSelect #: PS11741734
Manufacturer #: WP3412D025-09
This part distributes flame evenly to your cookware.
$169.81
Special Order
Regulator Kit with Fitting
PartSelect #: PS2002939
Manufacturer #: 12001285
This part will cut off the flow of gas to your appliance once it reaches a certain pressure.
No Longer Available
Oven Igniter
PartSelect #: PS11744543
Manufacturer #: WP7432P097-60
Used with RV ranges.
No Longer Available
Valve Screw
PartSelect #: PS3651486
Manufacturer #: W10491986
Part might differ in appearance, but functions same as original. Sold individually.
$9.88
Special Order
Surface Burner Knob - Black
PartSelect #: PS2081924
Manufacturer #: 74003941
This burner knob is black in color, and has "off, hi and lite" written on the side.
No Longer Available
Questions And Answers for ALZ8580ADS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the ALZ8580ADS
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
gas burner ignitor failure
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed that rust and dirt had built up around burner to pan connection.I used my oil filter wrench to turn slightly the burner to remove it from the pan to clean.Reassembled in reverse order.
Parts Used:
-
roy from East Providence, RI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
142 of 162 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
porcelan on igniter broken (2)
remove 2 screws that hold element in place, remove element, replace with new element, and replace screws , replaced burner assy on other
Parts Used:
-
paul from mc neal, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
31 of 46 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The grommets came apart metal from rubber.
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.
Parts Used:
-
Frank from Pierce, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!