Meet the authentic GE Fan Blade'a dependable and top-notch replacement part for your room air conditioner. This critical component plays a key role when it comes to air circulation within your unit's ...
This slide -in air filter is a genuine OEM replacement part for your air conditioner. The air filter helps eliminate dirt and dust from re-circulating through the air when running your air conditioner...
No Longer Available
Questions And Answers for AJHS08DCM1
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed A/C unit from wall, removed 8 screws that held fan motor in place, removed 8 screws that held fan shroud in place, removed fan blade nut and pulled fan blade unit from motor shaft. Reversed steps to install.
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on terminals. These are harder to get off and on since there are many and are in a tight space. May want to use some long needle nose pliers to assist. The new cable was attaced. There are two plastic clamps that help screw the cord to the unit. Only porblem was the new cord plugs in upside down so you will need to turn the outlet plug around. Turn off power, unscrew outlet and turn upside down. return power to outlet and plug in to complete.
