AGW12AAG1 General Electric Air Conditioner - Overview

Sections of the AGW12AAG1

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
REMOTE CONTROLLER Assembly – Part Number: WJ26X10049
REMOTE CONTROLLER Assembly
PartSelect #: PS275785
Manufacturer #: WJ26X10049
  No Longer Available
Condenser Fan Blade – Part Number: WJ73X10016
Condenser Fan Blade
PartSelect #: PS278354
Manufacturer #: WJ73X10016
  No Longer Available
Accordion Panel (Left) – Part Number: WJ86X10002
Accordion Panel (Left)
PartSelect #: PS279177
Manufacturer #: WJ86X10002
  No Longer Available
CURTAIN Assembly R H – Part Number: WJ86X10003
CURTAIN Assembly R H
PartSelect #: PS279178
Manufacturer #: WJ86X10003
  No Longer Available
BRACKET SILL SUPPORT – Part Number: WJ01X10074
BRACKET SILL SUPPORT
PartSelect #: PS274131
Manufacturer #: WJ01X10074
$25.85
  Special Order
Frame Guide - Black – Part Number: WJ05X10024
Frame Guide - Black
PartSelect #: PS274402
Manufacturer #: WJ05X10024
This part attaches to the curtain to help hold it in place.
  No Longer Available
FRONT PANEL – Part Number: WJ71X21461
FRONT PANEL
PartSelect #: PS11767537
Manufacturer #: WJ71X21461
  No Longer Available
COMPRESSOR – Part Number: WJ98X10073
COMPRESSOR
PartSelect #: PS280482
Manufacturer #: WJ98X10073
  No Longer Available
PWB Assembly MAIN – Part Number: WJ26X10046
PWB Assembly MAIN
PartSelect #: PS275782
Manufacturer #: WJ26X10046
  No Longer Available
PWB Assembly DISPLAY – Part Number: WJ26X10047
PWB Assembly DISPLAY
PartSelect #: PS275783
Manufacturer #: WJ26X10047
  No Longer Available
OVERLOAD PROTECTOR – Part Number: WJ23X10015
OVERLOAD PROTECTOR
PartSelect #: PS275508
Manufacturer #: WJ23X10015
$144.50
  Special Order
THERMISTOR Assembly – Part Number: WJ27X10035
THERMISTOR Assembly
PartSelect #: PS275939
Manufacturer #: WJ27X10035
  No Longer Available

Questions And Answers for AGW12AAG1

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fan blade was broken
Took cabinet off. Loosened rear condenser and moved it out of the way. Took fan blade off of motor shaft and replaced. Actually broke off small part of blade hub tapping it on to the shaft with a hammer - use a block of wood to protect!
Parts Used:
Condenser Fan Blade
  • Jonathan from Baltimore, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken fan blade
Removed 10 screws holding fan schroud,top brace,and condenser. Remove schroud from condenser and push back toward fan motor. Pull condenser gently away from fan far enough to remove spring clip from old fan with pliers. Tap on old fan blade hub lightly until it comes off. (Important) Make sure you line up flat side of motor shaft with flat side new fan hub. When lined up tap back on and assemble in reverse order. Took 15 mins to replace and 15 mins to clean condenser.
Parts Used:
Condenser Fan Blade
  • Dennis from VALLEY SPRINGS, SD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!