ADFD5448AT LG Dishwasher - Overview
Models starting with ADFD5448AT
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Dishwasher Holder
PartSelect #: PS12081829
Manufacturer #: MEG64438801
This gray mounting bracket is designed to securely hold the dish rack in place inside your dishwasher during operation. Measuring 1 inch by 1 inch, it ensures stability and helps prevent the rack from...
$17.44
In Stock
Dishwasher Roller Assembly
PartSelect #: PS12075858
Manufacturer #: 4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
$17.44
In Stock
Hose Drain Assembly
PartSelect #: PS16621806
Manufacturer #: AEM74333104
This drain hose assembly is designed for use with select LG washing machines and includes both the flexible rubber hose and plastic connectors. It efficiently channels used water from the washer tub t...
$97.49
In Stock
Circulation Pump
PartSelect #: PS12579574
Manufacturer #: ABT72989206
This pump casing assembly is designed for use in select LG dishwasher models and houses several key components responsible for water circulation during wash and drain cycles. It includes the motor, wh...
$462.38
In Stock
HOLDER
PartSelect #: PS12081831
Manufacturer #: MEG64438902
This grey tine row retainer is designed to securely hold the horizontal tine rows on your dishwasher rack, keeping them in place so dishes stay organized and stable throughout each wash cycle. It clip...
$17.44
In Stock
Mesh Filter Assembly
PartSelect #: PS12078011
Manufacturer #: ADQ74693701
Keep your dishwasher running smoothly with this LG mesh filter assembly. It traps food particles and debris so they don’t clog the drain or spray arms, helping your dishes come out cleaner every time....
$64.91
On Order
Lower Cover Assembly
PartSelect #: PS12077222
Manufacturer #: ACQ88920601
This lower cover assembly, also known as a sump cover, is an essential part of the dishwasher’s internal system. It shields the pump and other components from food particles, helps filter debris from ...
$56.87
In Stock
Common Symptoms of models starting with ADFD5448AT
[Viewing 4 of 4]Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Loud noise when running - the infamous bad drive motor
Replacing this pump is pretty easy. Disconnect the power and drain hose, and pull your dishwasher out from the counter. Lay it on its side on a towel. There WILL be spillage. Disconnecting the pump is simple. There are a couple hoses, one single wire connection (the thermistor) and one multi-wire plug. The pump is held in place by a pair of thick rubber holders which can be pulled off by hand. That's it!
After removing the pump, I disassembled it to find out why these fail so soon. It's a very poor design. I found that the nose of the electric motor, where the bearings are located, sits in a plastic cup formed by the top of the pump body. Any leakage from the pump around the motor shaft will be held in place against the motor bearing. It has no place to go. This causes rusting of the bearing. I expect I'll be replacing this one in a few years. :(
But kudos to PartsSelect for getting the right pump assembly for me, after getting the wrong one from another supplier!
After removing the pump, I disassembled it to find out why these fail so soon. It's a very poor design. I found that the nose of the electric motor, where the bearings are located, sits in a plastic cup formed by the top of the pump body. Any leakage from the pump around the motor shaft will be held in place against the motor bearing. It has no place to go. This causes rusting of the bearing. I expect I'll be replacing this one in a few years. :(
But kudos to PartsSelect for getting the right pump assembly for me, after getting the wrong one from another supplier!
Parts Used:
-
Mark from TEHACHAPI, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
29 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Parts Used:
-
Lenny from KIRTLAND, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
9 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two Rollers missing on lower tray.
-
Thomas from BOYNTON BEACH, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!