This part number matches the current model number A126W
PartSelect #: PS2103294
Manufacturer #: A126W
Manufacturer's Number: A126W Haloring halogen element with glass-ceramic surface for all Designer Line Jenn-Air cooktops. End plug-in cartridge, also available in black. Note: This model has been repl...
This surface element is for ranges.
The surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before insta...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sylvia
August 11, 2023
Plugged stove in and all lights come on we have electric but none of the burners gets warm. There is a small cord with a plug at end but don’t know where it goes
For model number A126W
Hello Sylvia, thank you for contacting us. According to our research, you may need to connect the small cord with the terminal block connector spade, part number PS1988157, to fix the issue. We hope this helps!
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit. Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.