Models > A125B

A125B Jenn-Air Cooktop - Overview

Sections of the A125B

[Viewing 1 of 1]

Exact Part matches for your search term

[Viewing 1 of 1]
Black Radiant Element Cartridge – Part Number: JEA8120ADBA
Black Radiant Element Cartridge
This part number matches the current model number A125B
PartSelect #: PS9491822
Manufacturer #: JEA8120ADBA
Ultra Quick-Start radiant element with glass-ceramic surface for all Designer Line Jenn-Air cooktops. End plug-in cartridge.
$943.74
  In Stock
Keep searches simple, eg. "belt" or "pump".
Burner Element - Right Front – Part Number: W10823698
Burner Element - Right Front
★★★★★
★★★★★
(5)
PartSelect #: PS11764908
Manufacturer #: W10823698
This surface element is for ranges. The surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before insta...
$280.50
  In Stock
Cartridge Male Contact Spade – Part Number: Y708572
Cartridge Male Contact Spade
★★★★★
★★★★★
(2)
PartSelect #: PS1988157
Manufacturer #: Y708572
This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.
$17.79
  In Stock
Burner Cartridge Terminal Block – Part Number: WPY708730
Burner Cartridge Terminal Block
PartSelect #: PS11757594
Manufacturer #: WPY708730
No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.
$78.20
  In Stock
ELMNT-SURF – Part Number: W10823702
ELMNT-SURF
PartSelect #: PS11764910
Manufacturer #: W10823702
$293.15
  In Stock
Terminal Block Insulator – Part Number: 708834
Terminal Block Insulator
PartSelect #: PS1641107
Manufacturer #: 708834
This part fits inside your range's terminal block to act as an insulator for the contact spade.
$21.14
  In Stock
Screw – Part Number: WP488234
Screw
PartSelect #: PS11742713
Manufacturer #: WP488234
This screw is sold individually. Size: 8-32 x 1/4 inch.
$11.64
  In Stock
Screw – Part Number: WP12990527
Screw
PartSelect #: PS11738661
Manufacturer #: WP12990527
$6.83
  In Stock
Screw – Part Number: WPW10253196
Screw
PartSelect #: PS11751203
Manufacturer #: WPW10253196
Sold individually. This screw is half of an inch long. It is made of metal and it is intended for use with some Maytag brand ranges.
$5.97
  In Stock
CLIP – Part Number: Y708910
CLIP
PartSelect #: PS1988173
Manufacturer #: Y708910
This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.
  No Longer Available
USE WPL 5700M527-60 – Part Number: Y700648
USE WPL 5700M527-60
PartSelect #: PS2201265
Manufacturer #: Y700648
  No Longer Available
PAN Assembly – Part Number: 04100332
PAN Assembly
PartSelect #: PS540674
Manufacturer #: 04100332
  No Longer Available
WIRE----N – Part Number: Y700645
WIRE----N
PartSelect #: PS2201264
Manufacturer #: Y700645
  No Longer Available

Questions And Answers for A125B

Be the first to ask our experts a question about this model!

Common Symptoms of the A125B

[Viewing 1 of 1]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No heat on burner
Turned off electricity! Pulled stove out -lifted up glass top(carefully) simply removed burned out coil and replaced it with new one.
Parts Used:
Burner Element - Right Front
  • paul from trumbull, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
34 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
6" burner on the radiant surface started smoking and burned out.
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit. Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.
Parts Used:
ELMNT-SURF
  • Johnny from Henderson, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
24 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The top would not heat,large or small eye.
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder.
Parts Used:
Burner Cartridge Terminal Block Cartridge Male Contact Spade Terminal Block Insulator
  • Calvin from Merced, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
27 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!