917204140 Craftsman Lawn Tractor - Overview

Sections of the 917204140

[Viewing 11 of 11]
Keep searches simple, eg. "belt" or "pump".
Bolt-hex rb – Part Number: 74780416
Bolt-hex rb
PartSelect #: PS10007978
Manufacturer #: 74780416
  No Longer Available
Lawn Tractor Spacer Washer – Part Number: 187690
Lawn Tractor Spacer Washer
PartSelect #: PS9912093
Manufacturer #: 187690
  No Longer Available
Screw 1/4-20 x 5/8 – Part Number: 137729
Screw 1/4-20 x 5/8
PartSelect #: PS9890380
Manufacturer #: 137729
  No Longer Available
Lawn Tractor Deflector Shield Hinge Rod – Part Number: 131491
Lawn Tractor Deflector Shield Hinge Rod
PartSelect #: PS9888228
Manufacturer #: 131491
  No Longer Available
Lawn Tractor Torsion Spring – Part Number: 178102
Lawn Tractor Torsion Spring
PartSelect #: PS9909070
Manufacturer #: 178102
  No Longer Available
Hex locknut with washer insert – Part Number: 73800800
Hex locknut with washer insert
PartSelect #: PS10006966
Manufacturer #: 73800800
  No Longer Available
Lawn Tractor Push Nut – Part Number: 110452X
Lawn Tractor Push Nut
PartSelect #: PS9881075
Manufacturer #: 110452X
  No Longer Available
Bearing – Part Number: 110485X
Bearing
PartSelect #: PS9881121
Manufacturer #: 110485X
  No Longer Available
Socket Screw – Part Number: 183906
Socket Screw
PartSelect #: PS9911257
Manufacturer #: 183906
  No Longer Available
Latch Spring – Part Number: 198200
Latch Spring
PartSelect #: PS9916824
Manufacturer #: 198200
  No Longer Available
Service Clutch Kit – Part Number: 414336
Service Clutch Kit
PartSelect #: PS9952454
Manufacturer #: 414336
  No Longer Available
Bolt And Washer Assembly – Part Number: 193003
Bolt And Washer Assembly
PartSelect #: PS9915043
Manufacturer #: 193003
  No Longer Available

Questions And Answers for 917204140

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn out Mandrel Assemblies
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
Parts Used:
Lawn Mower Mandrel Assembly
  • Joseph from CANBY, MN
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!