Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Francis
June 1, 2023
Is there a diagram available which shows were each of the cotter pins go when the cutting deck is fully attached to the chassis of my lawn tractor?
Serial number 092915A002517.
i had to remove the deck to reattach a blade which fell off while cutting!
Now I have two cotter pins left over and do not know where they go.
For model number 917203911
Hi Francis, thank you for reaching out. Unfortunately, we couldn't locate a diagram. However, according to our research, one of the cotter pins goes on the anti-sway rod, and the other goes on the supporting arms. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
