9117118511 Kenmore Range - Overview

Sections of the 9117118511

[Viewing 6 of 6]
BACKGUARD SECTION Diagram and Parts List for Kenmore Range
BACKGUARD SECTION
BODY SECTION Diagram and Parts List for Kenmore Range
BODY SECTION
BURNER SECTION Diagram and Parts List for Kenmore Range
BURNER SECTION
MAIN TOP SECTION Diagram and Parts List for Kenmore Range
MAIN TOP SECTION
OVEN DOOR SECTION Diagram and Parts List for Kenmore Range
OVEN DOOR SECTION
WIRE HARNESSES AND COMPONENTS Diagram and Parts List for Kenmore Range
WIRE HARNESSES AND COMPONENTS
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WB1X1130
Screw
PartSelect #: PS234427
Manufacturer #: WB1X1130
Sold Individually.
$13.95
  Special Order
Screw – Part Number: WB1M1
Screw
PartSelect #: PS234320
Manufacturer #: WB1M1
Sold Individually.
$12.95
  Special Order
Washer - 12 Pack – Part Number: WB1X119D
Washer - 12 Pack
PartSelect #: PS234480
Manufacturer #: WB1X119D
$24.85
  Special Order
Range Screw – Part Number: WB1X1116
Range Screw
PartSelect #: PS234413
Manufacturer #: WB1X1116
$13.95
  Special Order
Burner Grate – Part Number: WB32X108
Burner Grate
PartSelect #: PS244699
Manufacturer #: WB32X108
  No Longer Available
IGNITER – Part Number: WB2X9005
IGNITER
PartSelect #: PS243322
Manufacturer #: WB2X9005
  No Longer Available
GASKET SCREW – Part Number: WB2X9008
GASKET SCREW
PartSelect #: PS243324
Manufacturer #: WB2X9008
$34.73
  Special Order
PILOT – Part Number: WB2X9015
PILOT
PartSelect #: PS243331
Manufacturer #: WB2X9015
  No Longer Available
CLIP-THERMO – Part Number: WB2X9027
CLIP-THERMO
PartSelect #: PS243342
Manufacturer #: WB2X9027
  No Longer Available
Door Seal – Part Number: WB2X9028
Door Seal
PartSelect #: PS243343
Manufacturer #: WB2X9028
This oven door seal prevents heat from escaping the oven cavity when in use.
  No Longer Available
INSULATION D – Part Number: WB2X9123
INSULATION D
PartSelect #: PS243397
Manufacturer #: WB2X9123
  No Longer Available
INSULATION – Part Number: WB2X9430
INSULATION
PartSelect #: PS243549
Manufacturer #: WB2X9430
  No Longer Available
Back to Top
View More

Questions And Answers for 9117118511

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Stove igniters not sparking
The spark control module is located in the top section near the clock. Take off the back cover. Use needle nose pliers to disconnect the wires. The modules are marked with letters so connecting the new module is very easy. The range works great. My Kenmore is a 1985 model.
Parts Used:
SPARK MODULE KIT
  • rick from NEWNAN, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas electric ignition system stopped working
Replaced old ignition module with new module from parts select.
The most important tip was to label each lead before removing from old ignition module.
Parts Used:
SPARK MODULE KIT
  • Henry from LAPORTE, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not light
Unplugged from wall. turned off gas. removed broiler. removed burner assy. removed cover for electicial panel. unplugged igniter from electicial panel. removed screw for igniter from burner& installed new one.
Parts Used:
IGNITER
  • frank from steger, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More