This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
This part acts like a safety thermostat on the appliance. Once it reaches a certain temperature it will shut off the heat source (element) to make sure the temperature doesn't go any higher.
Have you ever wished for a little extra safety when your GE range oven goes through a self-cleaning cycle? Our GE certified Oven Door Lock Assembly is here to put your mind ease. This essential part i...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chester
January 2, 2020
I need the list of fault codes and what each one means
For model number 9114742593
Hi Chester, thank you for your question. You will either have to get that from your brand manufacturer or you can look at a resource on our website that may help you here: https://www.partselect.com/JustForFun/Fault-Codes.aspx. Good luck with your repair.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Chester
December 26, 2019
Where can I find a fault code for the errors?
For model number 9114742593
Hello Chester, Thank you for the question. In order to trouble shoot the error code we will need to know what error code you are getting. Please submit a new question if you have any follow ups. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Jill
December 13, 2024
This is a very old oven. We think it’s the locking mechanism that is messed up. Do you have that available please? Serial #3V6994130. Thank you
Jill
For model number 9114742593
Hello Jill, Thank you for reaching out. The Door Lock and Switch Assembly for this model is showing as PartSelect #: PS2577623. We are happy to be of assistance!
first, made sure circuit breaker was off second, used nut driver to remove 2 screws on old element, pulled it from the back of the oven third, removed 2 wires from old element (spade connectors) fourth, connected new element and pushed back into oven. fifth, reinstalled 2 screws securing new element
this was all done by my 15 yr old son under my supervision.
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches, but I had not turned off the power. So, I shorted out one of the wires. Then I turned off the power but was afraid to go any farther. An appliance repairman was at my house that day fixing my dryer seal. He was able to pull the wires through the insulation successfully and install the broiler element. He did not charge me any extra for this little extra job. But I learned my lesson. Cut the power before you begin! He told me that I could have wound up with a much bigger repair if the short had been in the wire that is connected to the control panel of the oven. I was very lucky!
FIRST MAKE SURE THE OVEN IS OFF!!!! I chose to shut it off at the breaker panel. Remove the two screws that attaches the broiler element to the oven. Gently pull it out. Unplug the two cable wires that are attached. Replace it and install the same way.
