91143459590 Kenmore Cooktop - Overview
Sections of the 91143459590
[Viewing 1 of 1]
Manuals & Care Guides for 91143459590
Click to downloadKeep searches simple, eg. "belt" or "pump".
Drip Bowl - 6"
PartSelect #: PS244255
Manufacturer #: WB31K5024
This is a drip bowl for your range or cooktop. The drip bowl sits beneath the burner of an electric range and collects any spills that occur while cooking. The bowl is 6 inches in diameter and represe...
$21.95
Special Order
Surface Burner Terminal Block Kit
PartSelect #: PS232606
Manufacturer #: WB17X210
This kit comes with the terminal block, mounting clip and wires.
$91.36
Special Order
Range Indicator Light
PartSelect #: PS3406143
Manufacturer #: WB25X10024
We understand how crucial it is for your cooktop to function perfectly. That's why we're offering you the GE Indicator Light'a small component that contributes hugely to your cooking safety and effici...
$67.38
Special Order
Porcelain Burner Drip Bowl - 8"
PartSelect #: PS220981
Manufacturer #: PM32X5041
No Longer Available
Control Seal
PartSelect #: PS244578
Manufacturer #: WB32K5048
This part is used to seal around the knob in the control panel.
No Longer Available
Burner Control Knob Seal
PartSelect #: PS244555
Manufacturer #: WB32K5024
Sold individually. This seal prevents any leaks from getting under the cooktop or into the switch area.
No Longer Available
Control Seal - Gray
PartSelect #: PS244558
Manufacturer #: WB32K5027
This seal is used on White models.
No Longer Available
Questions And Answers for 91143459590
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 91143459590
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
There was no heat on the coils.
I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.
Parts Used:
-
Shaohui from East Lansing, MI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
48 of 52 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface burner coil did not work.
TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet, but needed one. The wire from burner coil to switch runs through a harness which is screwed on to the body of the oven (below the range). Be careful NOT to drop it behind oven when taking it out. I dropped it and took forever to get it. That turned a 20 minuate job into an hour and a half. Otherwise this is an easy job that anyone can do. Refrigerator compressor is next. Have fun.
Parts Used:
-
Gregory from Mont Belvieu, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set
23 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Previous home owners replaced 3 drip bowls with wrong style
I removed the heating elements and the drip bowls (wrong style). I then positioned the correct drip bowls on the stove and reinserted the heating elements. I snapped the heating coils into the small slots on the far side of the bowls to make sure that the heating elements would lay flat.
The whole process took less than 2 minutes.
The whole process took less than 2 minutes.
Parts Used:
-
Diane from Corpus Christi, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!