867769111 Kenmore Range - Overview

Sections of the 867769111

[Viewing 1 of 1]
Diagram Diagram and Parts List for Kenmore Range
Diagram
Keep searches simple, eg. "belt" or "pump".
Belt Drive Motor Kit with Capacitor – Part Number: 285222
Belt Drive Motor Kit with Capacitor
PartSelect #: PS334458
Manufacturer #: 285222
This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.
  No Longer Available
SVC-INNER BASE W SMALLER PIN;72991,DACMS – Part Number: DE81-03500A
SVC-INNER BASE W SMALLER PIN;72991,DACMS
PartSelect #: PS16628087
Manufacturer #: DE81-03500A
  No Longer Available
COLD SINK – Part Number: 72400
COLD SINK
PartSelect #: PS4268096
Manufacturer #: 72400
$202.11
  Special Order
INSULATION STRIP SHORT – Part Number: 72412
INSULATION STRIP SHORT
PartSelect #: PS4268109
Manufacturer #: 72412
$6.78
  Special Order
Chrome Conv. Oven Ra – Part Number: 82661
Chrome Conv. Oven Ra
PartSelect #: PS4271260
Manufacturer #: 82661
  No Longer Available
DISCONTINUED – Part Number: 86600B
DISCONTINUED
PartSelect #: PS4272903
Manufacturer #: 86600B
  No Longer Available
TOP FILTER-HEMMED – Part Number: 72988
TOP FILTER-HEMMED
PartSelect #: PS4268626
Manufacturer #: 72988
$148.60
  Special Order
INSULATION STRIP LONG – Part Number: 72411
INSULATION STRIP LONG
PartSelect #: PS4268108
Manufacturer #: 72411
$11.36
  Special Order
PUMP BODY AND BUSHING ASSEMBLY – Part Number: 83336
PUMP BODY AND BUSHING ASSEMBLY
PartSelect #: PS887046
Manufacturer #: 83336
  No Longer Available
DISCONTINUED – Part Number: 13767
DISCONTINUED
PartSelect #: PS2009476
Manufacturer #: 13767
  No Longer Available
BRACKET – Part Number: 86663
BRACKET
PartSelect #: PS2095136
Manufacturer #: 86663
  No Longer Available
SVC-RV TOP CAP 46 SST;82742S,RV46S – Part Number: DE81-07774A
SVC-RV TOP CAP 46 SST;82742S,RV46S
PartSelect #: PS16631230
Manufacturer #: DE81-07774A
  No Longer Available
Back to Top
View More

Questions And Answers for 867769111

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
It was the heat safety switch in the old drive motor
It was fairly easy a few tight spaces to reach in but all in all it was pretty straight forward
Parts Used:
Belt Drive Motor Kit with Capacitor
  • Andrew from HATTIESBURG, MS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer Had A Continuous Moan And Vibration
I disconnected the drive belt from the motor and ran the motor to isolate it from the rest of the mechanisms. This was the noise. I disconnected the water lines and electrical cord,laid the machine front down. I disconnected the motor plug,removed the two bracket to body bolts and lifted the motor out to the bench. I then transferred the bracket to the new motor and reversed the procedure to install the motor. The most difficult part was raising the machine back up alone,I suggest a helper.
Parts Used:
Belt Drive Motor Kit with Capacitor
  • Roger from Millis, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More