Models > 85RS-4K

85RS-4K Magic Chef Cooktop - Overview

Sections of the 85RS-4K

[Viewing 2 of 2]
BURNER ASSEMBLY Diagram and Parts List for Magic Chef Cooktop
BURNER ASSEMBLY
TOP & BURNER BOX Diagram and Parts List for Magic Chef Cooktop
TOP & BURNER BOX
Keep searches simple, eg. "belt" or "pump".
Rubber Grommet – Part Number: Y8007P02060
Rubber Grommet
PartSelect #: PS2202491
Manufacturer #: Y8007P02060
Used as the bottom feet of a gas stovetop grate. Sold individually.
  No Longer Available
Flashtube Extension - Rear – Part Number: 74003326
Flashtube Extension - Rear
PartSelect #: PS2081434
Manufacturer #: 74003326
This part allows gas to pass from the burner to the pilot flame so the burner will ignite.
  No Longer Available
Burner Control Valve with Igniter – Part Number: 74002413
Burner Control Valve with Igniter
PartSelect #: PS2080913
Manufacturer #: 74002413
$136.74
  In Stock
Igniter Knob – Part Number: WP74002414
Igniter Knob
PartSelect #: PS11744002
Manufacturer #: WP74002414
This igniter knob is less than two inches in diameter and a little over an inch high. It is a black knob with white lettering along its perimeter.
$30.18
  Special Order
Igniter and Knob – Part Number: 12001296
Igniter and Knob
PartSelect #: PS2002949
Manufacturer #: 12001296
May be different in appearance but will function as the original part.
$71.15
  Special Order
Regulator Kit with Fitting – Part Number: 12001285
Regulator Kit with Fitting
PartSelect #: PS2002939
Manufacturer #: 12001285
This part will cut off the flow of gas to your appliance once it reaches a certain pressure.
  No Longer Available
CLIP – Part Number: 7112P068-60
CLIP
PartSelect #: PS2078943
Manufacturer #: 7112P068-60
  No Longer Available
Top Burner Igniter – Part Number: WP7432P077-60
Top Burner Igniter
PartSelect #: PS11744542
Manufacturer #: WP7432P077-60
Used with RV Ranges.
$34.03
  Special Order
BUMPER – Part Number: 8003P008-60
BUMPER
PartSelect #: PS2093265
Manufacturer #: 8003P008-60
  No Longer Available
SUPPORT- T – Part Number: 3807F462-45
SUPPORT- T
PartSelect #: PS2040139
Manufacturer #: 3807F462-45
  No Longer Available
Top Burner Valve - 5200 – Part Number: 7502P181-60
Top Burner Valve - 5200
PartSelect #: PS2090108
Manufacturer #: 7502P181-60
Burner valves are attached to the main gas line. When the switch is turned, the gas then flows into a tube that mixes with air creating the appropriate mixture for ignition.
  No Longer Available
Handle Spacer – Part Number: 8010P073-60
Handle Spacer
PartSelect #: PS2093382
Manufacturer #: 8010P073-60
Sold Individually.
  No Longer Available
Back to Top
View More

Questions And Answers for 85RS-4K

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the 85RS-4K

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The grommets came apart metal from rubber.
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.
Parts Used:
Rubber Grommet
  • Frank from Pierce, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
23 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
range top loose, grommets missing
very easy to push each grommet into range top holes
Parts Used:
Rubber Grommet
  • joseph from wildomar, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
igniter would no longer work, it would stick
pull knob off streight out. remove two phillips head screws, disconnect wire to disassemble. To reassemble reattatch wire to replacement igniter, screw in two phillips head screws and push on the knob.
Parts Used:
Igniter Knob Burner Control Valve with Igniter
  • Randall from Rochester, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More