This part is a temperature sensing devise. It senses the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted. It is calibrated to permit...
This part is a replacement light socket for your refrigerator. This model is white in color, and it has two sockets that will fit two separate light bulbs. The light socket connects to the power sourc...
$116.08
In Stock
Questions And Answers for 79575004401
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
April 5, 2024
I just asked this question but I noticed the answer was for a different model kenmore than we have. Ours is model no. 795.75004401 and was made in 2005. Basically the freezer is working fine, but the fridge part is not cooling. The coils appear to be relatively dust free and the fan and compressor seem to be working fine. What's the likely part that needs to be replaced and please, some help figuring out where the part is on the fridge?
Thanks,
For model number 79575004401
Hello Patrick, thank you for getting in touch. According to our research, the issue is most probably with the fresh food section temperature sensor, part number PS3529165. It senses the temperature inside the refrigerator and sends information to the electronic control. It is located under a cover on the wall toward the front of your appliance approximately in the middle portion. You may need to replace it to fix the issue. We hope this solves your problem!
Hi Kathy,
Thank you for your question. The part number listed under your model number for the drip tray is PS3518788. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
